Garmin D2 Bravo Manuale d'uso - Pagina 11

Sfoglia online o scarica il pdf Manuale d'uso per Guarda Garmin D2 Bravo. Garmin D2 Bravo 28.
Anche per Garmin D2 Bravo: Manuale d'uso (36 pagine)

Garmin D2 Bravo Manuale d'uso
5
Select View Record.

Restoring a Personal Record

You can set each personal record back to the one previously
recorded.
1
Hold UP.
2
Select Fitness > My Stats > Records.
3
Select a sport.
4
Select a record to restore.
5
Select Previous > Yes.
NOTE: This does not delete any saved activities.
Clearing a Personal Record
1
Hold UP.
2
Select Fitness > My Stats > Records.
3
Select a sport.
4
Select a record to delete.
5
Select Clear Record > Yes.
NOTE: This does not delete any saved activities.
Clearing All Personal Records
1
Hold UP.
2
Select Fitness > My Stats > Records.
NOTE: This does not delete any saved activities.
3
Select a sport.
4
Select Clear All Records > Yes.
The records are deleted for that sport only.
Running Dynamics
You can use your compatible D2 Bravo device paired with the
HRM-Run
accessory to provide real-time feedback about your
running form. If your D2 Bravo device was packaged with the
HRM-Run accessory, the devices are already paired.
The HRM-Run accessory has an accelerometer in the module
that measures torso movement in order to calculate three
running metrics: cadence, vertical oscillation, and ground
contact time.
Cadence: Cadence is the number of steps per minute. It
displays total steps (right and left combined).
Vertical oscillation: Vertical oscillation is your bounce while
running. It displays the vertical motion of your torso,
measured in centimeters for each step.
Color Gauges and Running Dynamics Data
The running dynamics screen displays a color gauge for the primary metric. You can display cadence, vertical oscillation, or ground
contact time as the primary metric. The color gauge shows you how your running dynamics data compares to those of other
runners. The color zones are based on percentiles.
Garmin has researched many runners of all different levels. The data values in the red or orange zones are typical for less
experienced or slower runners. The data values in the green, blue, or purple zones are typical for more experienced or faster
runners. Less experienced runners tend to exhibit longer ground contact times, higher vertical oscillation, and lower cadence than
more experienced runners. However, taller runners typically have slightly slower cadences and slightly higher vertical oscillation. Go
to
www.garmin.com
for more information on running dynamics. For additional theories and interpretations of running dynamics data,
you can search reputable running publications and websites.
Color Zone
Percentile in Zone
Purple
>95
Blue
70–95
Green
30–69
Orange
5–29
Red
<5
Tips for Missing Running Dynamics Data
If running dynamics data does not appear, you can try these
tips.
• Make sure you have the HRM-Run accessory.
Training
Ground contact time: Ground contact time is the amount of
Training with Running Dynamics
Before you can view running dynamics, you must put on the
HRM-Run accessory and pair it with your device
Sensors, page
HRM-Run accessory, the devices are already paired, and the
D2 Bravo is set to display running dynamics.
1
2
3
4
5
6
7
8
9
Cadence Range
Vertical Oscillation Range
>185 spm
<6.7 cm
174–185 spm
6.7–8.3 cm
163–173 spm
8.4–10.0 cm
151–162 spm
10.1–11.8 cm
<151 spm
>11.8 cm
• Pair the HRM-Run accessory with your D2 Bravo device
time in each step that you spend on the ground while
running. It is measured in milliseconds.
NOTE: Ground contact time is not available while walking.
17). If your D2 Bravo was packaged with the
Select an option:
• If your HRM-Run accessory and D2 Bravo device are
already paired, skip to step 8.
• If your HRM-Run accessory and D2 Bravo device are not
already paired, complete all the steps in this procedure.
Hold UP.
Select Settings > Apps.
Select an activity.
Select Data Screens > Run Dynamics > Status > Enabled.
NOTE: The running dynamics screen is not available for all
activities.
Select Primary Metric.
Select Cadence, GCT, or Vertical Osc..
The primary metric appears as the top field on the data
screen with a corresponding position on the color gauge.
Go for a run
(Going for a Run, page
Select UP or DOWN to view the running dynamics screen to
view your metrics.
Ground Contact Time Range
<208 ms
208–240 ms
241–272 ms
273–305 ms
>305 ms
Accessories with running dynamics have
module.
again, according to the instructions.
(Pairing ANT+
3).
on the front of the
7