Alive Air Air Purifier Manuale d'uso - Pagina 9

Sfoglia online o scarica il pdf Manuale d'uso per Pulitore d'aria Alive Air Air Purifier. Alive Air Air Purifier 17. Alive air 9-stage air purifier owner’s manual
Anche per Alive Air Air Purifier: Manuale d'uso (17 pagine)

Stampa la pagina

CLEANING AND MAINTENANCE ( Cont. )

IMPORTANT:

These disassembly instructions are provided as a general guide. You

to fully disassemble the unit to clean an individual component or filter.

Before starting any cleaning or maintenance, always turn-off and unplug the unit.

Disassembling the Alive Air

After unplugging, either leave the unit upright or carefully lay it down face-up. Disassemble the unit

in sequence of 1 to 5 as shown below. (Put the unit back together in the reverse 5 to 1 sequence.)

1. Remove the Front Face Plate

Gently lift up the front cover at a 45° angle as shown

3. Remove the Washable Electronic Grid

Push the electronic grid towards the bottom of the device

Hold the two tabs and lift up the electronic grid

Push the electronic grid towards the bottom of the device

Alive Air 9-Stage Air Purifier Owner's Manual

2. Remove Washable Black Mesh Pre-Filter

4. Remove the HEPA/Activated Charcoal Filter

Place your hand in position A and pull out the filter.

When replacing the Filter, please reinsert in the exact

front-and-back direction indicated by the arrows on the side.

The white HEPA Filter should face you and the black

Activated Carbon Filter should face the unit.

5. Remove the TiO2 Filter

Hold the clips of both sides to help pulling

out the filter.

NOT

need