Garmin GPSMAP 800 Series Manuale d'uso - Pagina 18

Sfoglia online o scarica il pdf Manuale d'uso per Sistema di navigazione per auto Garmin GPSMAP 800 Series. Garmin GPSMAP 800 Series 46. Flat-mount kit
Anche per Garmin GPSMAP 800 Series: Manuale di avvio rapido (17 pagine), Addendum al Manuale del Pilota (22 pagine), Manuale d'uso (40 pagine), Manuale di avvio rapido (4 pagine), Manuale di istruzioni per l'installazione (6 pagine), Manuale dell'operatore (32 pagine), Manuale di istruzioni per l'installazione (34 pagine), Manuale di istruzioni per l'installazione (6 pagine)

Stampa la pagina

Safe Depth: Sets the minimum depth (chart depth datum) the

chartplotter uses when calculating an Auto Guidance line.

NOTE: The minimum safe depth for the premium charts is 3

feet. If you enter a Safe Depth value of less than 3 feet, the

charts only use depths of 3 feet for Auto Guidance route

calculations.

Safe Height: Sets the minimum height (chart height datum) of a

bridge that your boat can safely travel under.

Shoreline Distance: Sets how close to the shore you want the

Auto Guidance line to be placed. The Auto Guidance line

may move if you change this setting while navigating. The

available values for this setting are relative, not absolute. To

ensure that the Auto Guidance line is placed the appropriate

distance from shore, you can assess the placement of the

Auto Guidance line using one or more familiar destinations

that require navigation through a narrow waterway

the Distance from

Shore).

Adjusting the Distance from Shore

The Shoreline Distance setting indicates how close to the shore

you want the Auto Guidance line to be placed. The Auto

Guidance line may move if you change this setting while

navigating. The available values for the Shoreline Distance

setting are relative, not absolute. To ensure the Auto Guidance

line is placed the appropriate distance from shore, you can

assess the placement of the Auto Guidance line using one or

more familiar destinations that require navigation through a

narrow waterway.

Dock your vessel or drop the anchor.

Select Settings > Navigation > Auto Guidance > Shoreline

Distance > Normal.

Select a destination that you have navigated to previously.

Select Navigate To > Auto Guidance.

Review the placement of the Auto Guidance line, and

determine whether the line safely avoids known obstacles

and the turns enable efficient travel.

Select an option:

• If the placement of the Auto Guidance line is satisfactory,

select MENU > Stop Navigation, and proceed to step 10.

• If the Auto Guidance line is too close to known obstacles,

select Settings > Navigation > Auto Guidance >

Shoreline Distance > Far.

• If the turns in the Auto Guidance line are too wide, select

Settings > Navigation > Auto Guidance > Shoreline

Distance > Near.

If you selected Near or Far in step 6, review the placement of

the Auto Guidance line, and determine whether the line

safely avoids known obstacles and the turns enable efficient

travel.

Auto Guidance maintains a wide clearance from obstacles in

open water, even if you set the Shoreline Distance setting to

Near or Nearest. As a result, the chartplotter may not

reposition the Auto Guidance line, unless the destination

selected requires navigation through a narrow waterway.

Select an option:

• If the placement of the Auto Guidance line is satisfactory,

select MENU > Stop Navigation, and proceed to step 10.

• If the Auto Guidance line is too close to known obstacles,

select Settings > Navigation > Auto Guidance >

Shoreline Distance > Farthest.

• If the turns in the Auto Guidance line are too wide, select

Settings > Navigation > Auto Guidance > Shoreline

Distance > Nearest.

If you selected Nearest or Farthest in step 8, review the

placement of the Auto Guidance line, and determine

whether the line safely avoids known obstacles and the turns

enable efficient travel.

Auto Guidance maintains a wide clearance from obstacles in

open water, even if you set the Shoreline Distance setting to

Near or Nearest. As a result, the chartplotter may not

reposition the Auto Guidance line, unless the destination

selected requires navigation through a narrow waterway.

Repeat steps 3 through 9 at least once more, using a

different destination each time, until you are familiar with the

functionality of the Shoreline Distance setting.

Tracks

A track is a recording of the path of your boat. The track

currently being recorded is called the active track, and it can be

saved. You can show tracks in each chart or 3D chart view.

Showing Tracks

From a chart or a 3D chart view, select MENU > Waypoints

(Adjusting

& Tracks > Tracks > On.

A trailing line on the chart indicates your track.

Setting the Color of the Active Track

Select Nav Info > Tracks > Active Track Options > Track

Color.

Select a track color.

Saving the Active Track

The track currently being recorded is called the active track.

Select Nav Info > Tracks > Save Active Track.

Select an option:

• Select the time the active track began.

• Select Entire Log.

Select Save.

Viewing a List of Saved Tracks

Select Nav Info > Tracks > Saved Tracks.

Editing a Saved Track

Select Nav Info > Tracks > Saved Tracks.

Select a track.

Select Edit Track.

Select an option:

• Select Name, and enter the new name.

• Select Track Color, and select a color.

Saving a Track as a Route

Select Nav Info > Tracks > Saved Tracks.

Select a track.

Select Edit Track > Save Route.

Browsing for and Navigating a Recorded Track

Before you can browse a list of tracks and navigate to them, you

must record and save at least one track (Tracks).

Select Nav Info > Tracks > Saved Tracks.

Select a track.

Select Follow Track.

Select an option:

• To navigate the track from the starting point used when

the track was created, select Forward.

• To navigate the track from the destination point used

when the track was created, select Backward.

Review the course indicated by the colored line.

Follow the line along each leg in the route, steering to avoid

land, shallow water, and other obstacles.

Deleting a Saved Track

Select Nav Info > Tracks > Saved Tracks.

Navigation with a Chartplotter