Brother 882-T51 Manuale operativo - Pagina 3

Sfoglia online o scarica il pdf Manuale operativo per Macchina da cucire Brother 882-T51. Brother 882-T51 44. Embroidery machine

Introduction

Thank you for purchasing this embroidery machine. Before using this machine, carefully read the

"IMPORTANT SAFETY INSTRUCTIONS", and then study this manual for the correct operation of the

various functions.

In addition, after you have finished reading this manual, store it where it can quickly be accessed for

future reference.

Please read these safety instructions before attempting to use the machine.

DANGER

Always unplug the machine from the electrical outlet immediately after using, when cleaning, when making any

user servicing adjustments mentioned in this manual, or if you are leaving the machine unattended.

WARNING

Always unplug the machine from the electrical outlet when lubricating it or when making any other user

servicing adjustments mentioned in the operation manual.

• To unplug the machine, switch the machine to the symbol "O" position to turn it off, then grasp the plug and pull

it out of the electrical outlet. Do not pull on the cord.

• Plug the machine directly into the electrical outlet. Do not use an extension cord.

• Always unplug your machine if the power is cut.

Electrical Hazards:

• This machine should be connected to an AC power source within the range indicated on the rating label. Do not

connect it to a DC power source or inverter. If you are not sure what kind of power source you have, contact a

qualified electrician.

• This machine is approved for use in the country of purchase only.

Never operate this machine if it has a damaged cord or plug, if it is not working properly, if it has been dropped

or damaged, or water is spilled on the unit. Return the machine to the nearest authorized Brother dealer or

service center for examination, repair, electrical or mechanical adjustment.

• To avoid electric shock or fire; do not use a damaged power supply plug or loose electrical outlet, and ensure

that the power supply plug is fully inserted and secure.

• While the machine is stored or in use if you notice anything unusual, such as an odor, heat, discoloration or

deformation, stop using the machine immediately and unplug the power cord.

• When transporting the machine, be sure to lift it from the bottom positions. Lifting the machine by any other part

may damage the machine or result in the machine falling, which could cause injuries.

• When lifting the machine, be careful not to make any sudden or careless movements, otherwise you may injure

your back or knees.

• While the machine is being transported, be careful not to touch the operation panel, thread guides or any other

part, otherwise injuries may result.

To reduce the risk of electric shock:

To reduce the risk of burns, fire, electric shock, or injury to persons: