Brother 885-X11 Manuale operativo - Pagina 19

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

While lightly holding the thread, turn the

6

needle threader lever toward the front of

the machine (toward you). The hook will

pull the thread through the needle.

Raise the needle threader lever.

7

Pull the loop of the thread passed through

8

the eye of the needle toward the rear of

the machine.

1 Loop of thread

CAUTION

●

Be careful not to pull on the thread with

force or it may bend the needle.

●

If the thread does not pass through the

eye of the needle, start from step

again.

Raise the presser foot lever.

9

0

1

1

2

3

Pass the end of the thread through the

presser foot, and then pull out about 5 cm

(2 inches) of thread toward the rear of the

machine.

1

1 5 cm (2 inches)

Note

● If you incorrectly feed the thread you may

cause sewing problems.

Drawing up the lower

thread

While lightly holding the end of the upper

thread, slowly turn the handwheel toward

you (counterclockwise) by hand to lower

and then raise the needle.

Pull on the upper thread to draw up the

lower thread.

1

2

2

1 Upper thread

2 Lower thread

1

1

18