Brother 885-X11 Manuale operativo - Pagina 32

Sfoglia online o scarica il pdf Manuale operativo per Macchina da cucire Brother 885-X11. Brother 885-X11 44.
Anche per Brother 885-X11: Manuale operativo (44 pagine), Manuale operativo (44 pagine), Manuale operativo (44 pagine)

Stampa la pagina

SEWING BUTTONHOLES AND BUTTONS — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Step

Sewn section

Step 3

(Back bar tack)

1. Turn the pattern selection dial to "c" (same

position as in step 1).

2. Sew 5 to 6 stitches.

3. Stop the machine when the needle is at the right

side of the stitch and then raise the needle from the

material.

Step 4

(Right side)

1. Set the pattern selection dial to "d".

2. Sew the right side until the needle reaches the

stitches sewn in step 1.

■ Securing the Stitching and Cutting the

Buttonhole

To secure the stitching, turn the material

90 degrees counterclockwise and sew

straight stitches to the end of the front bar

tack of the buttonhole.

Remove the material from the machine.

We recommend that you put pins across

both ends of the buttonhole to prevent the

stitches from being cut.

Cut an opening in the middle of the

buttonhole with the seam ripper tool. Be

careful not to cut through any stitches.

CAUTION

●

When using the seam ripper to open the

buttonhole, do not put your hand or

finger in the path of the ripper. The seam

ripper may slip and you may be injured.

Pattern

Adjusting buttonholes

If the stitching on the two sides of the buttonhole is not

the same, you can make the following adjustments.

After sewing the left side of the

buttonhole, stitch the right side and

observe the feeding.

1 Right row

If the left side is too open or tight

compared with the right side, adjust the

buttonhole fine-adjustment screw as

described in the following paragraphs.

1 Buttonhole fine-adjustment screw

2 Left side

3 Buttonhole appearance

If the left side is too open, turn the buttonhole

fine-adjustment screw with a large

screwdriver in the

If the left side is too tight, turn the buttonhole

fine-adjustment screw with a large

screwdriver in the

• This adjustment ensures both sides of the

"–"

direction.

"+"

direction.

buttonhole are the same.