Brother 929D Manuale di servizio - Pagina 11

Sfoglia online o scarica il pdf Manuale di servizio per Macchina da cucire Brother 929D. Brother 929D 20.

1. Open the cloth plate and raise the feed dog to its highest position.

2. Set the sewing pitch at "3".

3. Loosen the set screw of the vertical adjusting shaft.

4. Turn the vertical adjusting shaft by the driver so that the clearance between the surface of the needle plate

and the upper surface of the feed dog is to 0.9 ~ 1.1 mm at the center.

5. After the adjustment, tighten the set screw of the vertical adjusting shaft well.

NOTE: (a) Stitches tend to pucker in fine fabrics, or the feed dog will touch the needle plate as the feed dog

reaches a higher position.

(b) The fabric will not be fed sufficiently or the feed dog will touch other parts like the looper as the

feed dog reaches a lower position.

www.promelectroavtomat.ru

- 9-