Garmin G3000 Manuale di istruzioni - Pagina 8

Sfoglia online o scarica il pdf Manuale di istruzioni per Display avionico Garmin G3000. Garmin G3000 18. Swapping gsa80 roll & gsa80 yaw servo on citation cj3+

Stampa la pagina

• TAWS Class A

o From the Home screen of either GTC 570, select the TAWS button. Then select

TAWS Selection button. If there are 6 buttons displayed on the page, then TAWS

A is loaded, and mark YES. Otherwise TAWS B is loaded as default. Note: First

image is TAWS B, and second image is TAWS A.

YES

• EROS Oxygen Mask

o Look at the crew mask and determine if EROS brand. If the mask is an EROS, mark

YES. Note: The option changes the gains for the microphone if EROS is installed.

YES

Placing System Into Configuration Mode

Note: Anytime that software or configurations are being loaded, all three displays, and both

touch controllers must be in configuration mode.

• When GCU 1 is replaced, then software and configuration loading is required.

1) Pull the following circuit breakers:

 L PFD

 MFD

 R PFD

 L Touch Control

 R Touch Control

2) Insert the 010-01293-10 software loader card into the upper slot of PFD 1.

3) Turn on aircraft power.

Version 1.0

REFERENCE ONLY