Garmin GNS 430 Addendum al Manuale del Pilota - Pagina 13

Sfoglia online o scarica il pdf Addendum al Manuale del Pilota per Display avionico Garmin GNS 430. Garmin GNS 430 27. Friendlypanels gps for microsoft fs9 & fsx
Anche per Garmin GNS 430: Manuale del pilota (22 pagine), Manuale di istruzioni (6 pagine), Addendum al Manuale del Pilota (4 pagine), Riferimento rapido (23 pagine), Addendum al Manuale del Pilota (22 pagine), Specifiche (2 pagine), Manuale operativo del pilota (10 pagine), Riferenza rapida (17 pagine), Manuale operativo (27 pagine)

To begin tracking intruder aircraft

1. Turn the cursor on and highlight STBY.

2. Turn the small right knob to select OPER.

3. Press ENT to conﬁ rm operating mode and begin tracking intruder aircraft.

The FAILED message occurs when the system detects an error that prohibits further trafﬁ c

display operation as long as this message stays on the screen.

User-initiated Test

A user-initiated test can only be performed when in standby or failed mode.

In addition to the power-up test, the SKYWATCH performs a continuous self-test. This continuous

self-test is performed several times per minute. A user-initiated test of the SKYWATCH Interface can also

be performed.

To perform a user-initiated test:

1. Turn the small right knob to select the Trafﬁ c Page.

2. From the Trafﬁ c Page, press MENU to display the Page Menu.

3. Turn the small right knob to select 'Self Test?' and press ENT.

See the SKYWATCH Pilot' s Guide for information on voice announcements.

The unit must be in operating mode for trafﬁ c to be displayed. The ability to switch out of standby

into operating mode on the ground is especially useful for scanning the airspace around the airport before

takeoff.

Getting Started

Section 3

SKYWATCH Interface

Main Page Sequence

Operating Mode is conﬁ rmed by the display of

'OPER' in the upper right-hand corner of the

Trafﬁ c Page.