To View a List of the Nearest Airports
1. From any page, press and hold CLR to select the Default NAV Page. (You
may skip this step if you are already
viewing any of the main pages.)
2. Rotate the large right knob to select
the NRST page group. "NRST" will appear
in the lower right corner of the screen.
3. If necessary, rotate the small right
knob to select the Nearest Airport Page.
To Scroll Through the List of Nearest Airports
1. Press the small right knob to activate the cursor.
2. Rotate the large right knob to scroll through the list. The scroll bar along
the right-hand side of the page will indicate which part of the list is
currently being viewed.
3. To remove the flashing cursor, press the small right knob.
To View Additional Information for a Nearby Airport
1. Highlight the identifier of the desired
airport by scrolling through the list, as
described in the procedure above.
2. Press ENT to display the Airport Location
Page for the selected airport.
3. To view additional WPT pages for the
selected airport (including the Airport
Runway and Airport Frequency Pages)
press the small right knob to remove the flashing cursor. Rotate the
small right knob to display the additional WPT pages. When finished,
press the small right knob to return the flashing cursor to the screen.
4. To return to the Nearest Airport Page,
verify that "Done?" is highlighted by the
flashing cursor and press ENT (or press
CLR).
To Select a Nearby Airport as a
Direct-To Destination
1. Press the direct-to key. The select direct-to waypoint page will appear,
with the waypoint identifier field highlighted.
2. Rotate the large right knob to
highlight the nearest airport (NRST) field.
3. Rotate the small right knob to display
a window showing up to nine nearby
airports.
4. Continue rotating the small right knob
to scroll through the list and highlight the
desired airport.
5. Press ENT to confirm the selected airport, and press ENT a second time
(with "Activate?" highlighted) to begin navigating to the selected
waypoint.
To Quickly Tune and Activate the 121.500 Emergency
Channel
1. Press and hold the COM flip-flop key for approximately two seconds.
11
Stampa la pagina