Garmin GPSMAP 800 Series Manuale di avvio rapido - Pagina 8

Sfoglia online o scarica il pdf Manuale di avvio rapido per Display avionico Garmin GPSMAP 800 Series. Garmin GPSMAP 800 Series 17. Flat-mount kit
Anche per Garmin GPSMAP 800 Series: Addendum al Manuale del Pilota (22 pagine), Manuale d'uso (40 pagine), Manuale di avvio rapido (4 pagine), Manuale d'uso (46 pagine), Manuale di istruzioni per l'installazione (6 pagine), Manuale dell'operatore (32 pagine), Manuale di istruzioni per l'installazione (34 pagine), Manuale di istruzioni per l'installazione (6 pagine)

Stampa la pagina
Garmin GPSMAP 800 Series Manuale di avvio rapido
1. Connect the heart rate monitor
module
to the strap.
➊
2. Wet both electrodes
back of the strap to create a strong
connection between your chest and
the transmitter.
3. Wrap the strap around your chest,
and connect it.
The Garmin logo should be right-
side up.
4. Bring the device within range (3 m)
of the heart rate monitor.
TIP: If the heart rate data is erratic
or does not appear, you may have to
tighten the strap on your chest or warm
up for 5–10 minutes.
6
➊
on the
➋
➋
After you put on the heart rate monitor,
it is on standby and ready to send data.
When the heart rate monitor is paired,
a message appears, and
solid on the status page.
installing the GSC 10
NOTE: If you do not have a GSC 10,
you can skip this task.
Both magnets must be aligned with
their respective indication lines for the
Edge to receive data.
1. Place the GSC 10 on the rear chain
stay (on the side opposite the drive
train).
NOTE: Place the flat rubber pad
or the triangle-shaped rubber pad
between the GSC 10 and the chain
stay for stability.
Edge 800 Quick Start Manual
appears
➊