Garmin GTN 650 Istruzioni per l'attivazione - Pagina 20

Sfoglia online o scarica il pdf Istruzioni per l'attivazione per Display avionico Garmin GTN 650. Garmin GTN 650 46. Gps/sbas navigation system as installed in cessna 172r
Anche per Garmin GTN 650: Manuale d'uso (20 pagine), Supplemento al manuale (31 pagine), Errata corrige (4 pagine), Manuale d'uso (22 pagine), Manuale di volo (49 pagine), Manuale di riferimento rapido (2 pagine), Manuale del pilota (28 pagine)

5. Refer to Table 4-1 to read the SAT ID/CONNECTIVITY information.

6. Verify radio IDs and signal quality is between 2 – 3. If signal quality is zero, check the antenna and

wiring.

„- -„

„XM‟

„X0‟, „X1‟, „X2‟, or „X3‟

„-0‟, „-1‟, „-2‟, or „-3‟

"Searching..."

"Satellite in view"

4.3 Verify XM Subscribed Services

The 430/530 supports the following weather services: NEXRAD, graphical METAR, text-based

METAR, Wind, and Graphical Temperature/Dew Point. These services are available only in the

United States. Verify included services by displaying them on the unit, if applicable. If signal quality is

between 1 and 3, but no data is displayed, contact XM Satellite Radio to verify subscription. Be sure that

the unit is updated with the most current software.

Page 14

GDL 69/69A XM Satellite Radio Activation Procedures

SAT ID Field

GDL 69/69H – 430/530 Series interface communications not yet established.

GDL 69/69H not yet communicating with internal satellite radio hardware (normal

during power-up).

„X‟ = Satellite radio service activated. Satellite signal quality is indicated by the

numbers 0, 1, 2, or 3; where 0=none, 1=poor, 2=good, and 3=excellent.

„-‟ = Satellite radio service is not activated. Satellite signal quality is indicated by

the numbers 0, 1, 2, or 3; where 0=none, 1=poor, 2=good, and 3=excellent.

Connectivity Field

No satellite is currently in view, signal quality is „0‟.

Indicates a signal quality between 1 and 3.

190-00355-04

Rev. J