Garmin nuvi 500-Series Manuale d'uso - Pagina 14

Sfoglia online o scarica il pdf Manuale d'uso per Display avionico Garmin nuvi 500-Series. Garmin nuvi 500-Series 44. Flush mount template
Anche per Garmin nuvi 500-Series: Manuale di riferimento rapido (2 pagine), Manuale d'uso (28 pagine), Manuale d'uso (38 pagine), Informazioni importanti (1 pagine), Manuale di istruzioni per l'installazione (6 pagine), Manuale d'uso (50 pagine)

Stampa la pagina

Edit Layout: Sets the layout of the data overlay, or data fields.

You can select the data to be shown within each data field.

Navigation Inset: Shows the navigation inset when the vessel

is navigating to a destination.

Navigation Inset Setup: Allows you to configure the navigation

inset to show Route Leg Details, and to control when the

inset appears before a turn or destination.

Compass Tape: Shows the compass tape data bar when the

vessel is navigating to a destination.

Editing the Data Fields

You can change the data shown in the overlay numbers

displayed on the charts and other screens.

From a screen that supports overlay numbers, select Menu.

If necessary, select Chart Setup.

Select Overlay Numbers > Edit Layout.

Select a layout.

Select a data field.

Select the type of data shown in the field.

Available data options vary based on the chartplotter and

network configuration.

Showing a Navigation Inset

You can control whether a navigation inset appears on some

chart views. The navigation inset is shown only when the boat is

navigating to a destination.

From a chart or 3D chart view, select Menu.

If necessary, select Chart Setup.

Select Overlay Numbers > Navigation Inset > Auto.

Select Navigation Inset Setup.

Complete an action:

• To show waypoint velocity made good (VMG) when

navigating a route with more than one leg, select Route

Leg Details > On.

• To show next-turn data based on distance, select Next

Turn > Distance.

• To show next-turn data based on time, select Next Turn >

Time.

• To indicate how the destination data appears, select

Destination, and select an option.

Chart Appearance Settings

You can adjust the appearance of the different chart views.

Each setting is specific for the type of chart view that you are in.

NOTE: Not all settings apply to all charts and 3D chart views

and chartplotter models. Some options require premium maps

or connected accessories, such as radar.

From a chart or 3D chart view, select Menu > Chart Setup >

Chart Appearance.

Orientation: Sets the perspective of the map.

Detail: Adjusts the amount of detail shown on the map, at

different zoom levels.

Heading Line: Shows and adjusts the heading line, which is a

line drawn on the map from the bow of the boat in the

direction of travel, and sets the data source for the heading

line.

World Map: Uses either a basic world map or a shaded relief

map on the chart. These differences are visible only when

zoomed out too far to see the detailed charts.

Spot Depths: Turns on spot soundings and sets a dangerous

depth. Spot depths that are equal to or more shallow than

the dangerous depth are indicated by red text.

Safety Shading: Sets the shades from the shoreline to the

specified depth.

Depth Range Shading: Specifies an upper and lower depth to

shade between.

Symbols: Shows and configures the appearance of various

symbols on the chart, such as the vessel icon, navaid

symbols, land POIs, and light sectors.

Style: Sets how the chart appears over 3D terrain.

Hazard Colors: Shows shallow water and land with a color

scale. Blue indicates deep water, yellow is shallow water,

and red is very shallow water.

Safe Depth: Sets the appearance of a safe depth for Mariner's

Eye 3D.

NOTE: This setting affects only the appearance of hazard

colors in Mariner's Eye 3D. It does not affect the safe water

depth Auto Guidance setting or the sonar shallow water

alarm setting.

Range Rings: Shows and configures the appearance of range

rings, which help you to visualize distances in some chart

views.

Lane Width: Specifies the width of the navigation lane, which is

the magenta line in some chart views that indicates the

course to your destination.

Setting the Heading and Course Over Ground Lines

You can show the heading line and the course over ground

(COG) line on the chart.

COG is your direction of movement. Heading is the direction the

bow of the boat is pointed, when a heading sensor is

connected.

From a chart view, select Menu > Chart Setup > Chart

Appearance > Heading Line.

If necessary, select Source, and select an option:

• To automatically use the source available, select Auto.

• To use the GPS antenna heading for COG, select GPS

Heading (COG).

• To use data from a connected heading sensor, select

Heading.

• To use data from both a connected heading sensor and

the GPS antenna, select COG and Heading.

This displays both the heading line and the COG line on

the chart.

Select Display, and select an option:

• Select Distance > Distance, and enter the length of the

line shown on the chart.

• Select Time > Time, and enter the time used to calculate

the distance your boat will travel in the specified time at

your present speed.

Other Vessels Settings on the Charts and Chart

Views

NOTE: These options require connected accessories, such as

an AIS receiver or VHF radio.

From a chart or 3D chart view, select Menu > Other Vessels.

AIS List: Shows the AIS list

DSC List: Shows the DSC list

Display Setup: See

AIS Display

DSC Trails: Shows the tracks of DSC vessels, and selects the

length of the track that appears using a trail.

AIS Alarm: Sets the safe-zone collision alarm

Zone Collision

Alarm).

AIS Display Settings

NOTE: AIS requires the use of an external AIS device and

active transponder signals from other vessels.

(Viewing a List of AIS

Threats).

(DSC

List).

Settings.

(Setting the Safe-

Charts and 3D Chart Views