Garmin echomap 50 series Manuale d'uso - Pagina 15

Sfoglia online o scarica il pdf Manuale d'uso per Sistema GPS marino Garmin echomap 50 series. Garmin echomap 50 series 50. Flat-mount kit
Anche per Garmin echomap 50 series: Manuale di avvio rapido (4 pagine), Manuale d'uso (38 pagine), Manuale d'uso (44 pagine), Manuale d'uso (30 pagine), Manuale di istruzioni per l'installazione (6 pagine), Manuale di istruzioni per l'installazione (6 pagine), Manuale di istruzioni per l'installazione (34 pagine)

Stampa la pagina

From a chart or 3D chart view, select Menu.

If necessary, select Chart Setup.

Select Overlay Numbers > Navigation Inset > Auto.

Select Navigation Inset Setup.

Complete an action:

• To show waypoint velocity made good (VMG) when

navigating a route with more than one leg, select Route

Leg Details > On.

• To show next-turn data based on distance, select Next

Turn > Distance.

• To show next-turn data based on time, select Next Turn >

Time.

• To indicate how the destination data appears, select

Destination, and select an option.

Chart Appearance Settings

You can adjust the appearance of the different charts and 3D

chart views. Each setting is specific to the chart or chart view

being used.

NOTE: Not all settings apply to all charts and 3D chart views

and chartplotter models. Some options require premium maps or

connected accessories.

From a chart or 3D chart view, select Menu > Chart Setup >

Chart Appearance.

Orientation: Sets the perspective of the map.

Detail: Adjusts the amount of detail shown on the map, at

different zoom levels.

Heading Line: Shows and adjusts the heading line, which is a

line drawn on the map from the bow of the boat in the

direction of travel, and sets the data source for the heading

line.

Panoptix Area: Shows and hides the area being scanned by

the Panoptix

™

transducer. The attitude and heading reference

system (AHRS) must be calibrated use this feature

(Calibrating the Compass, page

World Map: Uses either a basic world map or a shaded relief

map on the chart. These differences are visible only when

zoomed out too far to see the detailed charts.

Spot Depths: Turns on spot soundings and sets a dangerous

depth. Spot depths that are equal to or more shallow than the

dangerous depth are indicated by red text.

Shallow Shading: Sets the shades from the shoreline to the

specified depth.

Depth Range Shading: Specifies an upper and lower depth to

shade between.

Symbols: Shows and configures the appearance of various

symbols on the chart, such as the vessel icon, navaid

symbols, land POIs, and light sectors.

Style: Sets how the chart appears over 3D terrain.

Hazard Colors: Shows shallow water and land with a color

scale. Blue indicates deep water, yellow is shallow water, and

red is very shallow water.

Preferred Depth: Sets the appearance of a safe depth for the

Mariner's Eye 3D chart view.

NOTE: This setting affects only the appearance of hazard

colors for the Mariner's Eye 3D chart view. It does not affect

the safe water depth Auto Guidance setting or the sonar

shallow water alarm setting.

Range Rings: Shows and configures the appearance of range

rings, which help you to visualize distances in some chart

views.

Lane Width: Specifies the width of the navigation lane, which is

the magenta line in some chart views that indicates the

course to your destination.

Charts and 3D Chart Views

19).

Setting the Heading and Course Over Ground Lines

You can show the heading line and the course over ground

(COG) line on the chart.

COG is your direction of movement. Heading is the direction the

bow of the boat is pointed, when a heading sensor is connected.

From a chart view, select Menu > Chart Setup > Chart

Appearance > Heading Line.

If necessary, select Source, and select an option:

• To automatically use the source available, select Auto.

• To use the GPS antenna heading for COG, select GPS

Heading (COG).

• To use data from a connected heading sensor, select

Heading.

• To use data from both a connected heading sensor and

the GPS antenna, select COG and Heading.

This displays both the heading line and the COG line on

the chart.

Select Display, and select an option:

• Select Distance > Distance, and enter the length of the

line shown on the chart.

• Select Time > Time, and enter the time used to calculate

the distance your boat will travel in the specified time at

your present speed.

Other Vessels Settings on the Charts and Chart Views

NOTE: These options require connected accessories, such as

an AIS receiver or VHF radio.

From a chart or 3D chart view, select Menu > Other Vessels.

AIS List: Shows the AIS list

page

7).

DSC List: Shows the DSC list

Display Setup: See

AIS Display Settings, page

DSC Trails: Shows the tracks of DSC vessels, and selects the

length of the track that appears using a trail.

AIS Alarm: Sets the safe-zone collision alarm

Zone Collision Alarm, page

AIS Display Settings

NOTE: AIS requires the use of an external AIS device and

active transponder signals from other vessels.

From a chart or 3D chart view, select Menu > Other Vessels >

Display Setup.

AIS Display Range: Indicates the distance from your location

within which AIS vessels appear.

Details: Shows details about AIS-activated vessels.

Proj. Heading: Sets the projected heading time for AIS-

activated vessels.

Trails: Shows the tracks of AIS vessels, and select the length of

the track that appears using a trail.

Fish Eye 3D Settings

NOTE: This feature is available with premium charts, in some

areas.

From the Fish Eye 3D chart view, select Menu.

View: Sets the perspective of the 3D chart view.

Tracks: Shows tracks.

Sonar Cone: Shows a cone that indicates the area covered by

the transducer.

Fish Symbols: Shows suspended targets.

(Viewing a List of AIS Threats,

(DSC List, page

28).

(Setting the Safe-

7).