AEG KM7100000 Manuale d'uso - Pagina 16

Sfoglia online o scarica il pdf Manuale d'uso per Forno AEG KM7100000. AEG KM7100000 44. Aeg oven

Stampa la pagina

Automatic programmes

General instruction:

• If you set a clock function, the symbol flashes for approximately 5 seconds. In these 5

seconds, touch

• If you set the time, the symbol continues to flash for approximately 5 seconds. After

these 5 seconds, the symbol comes on. The time starts to count down for Minute mind-

er. For Duration and End the time starts to count down after the function starts.

• If you want to delay the start of the cooking time use End function

• If you want to end cooking earlier (before end of clock functions) use

AUTOMATIC PROGRAMMES

WARNING!

Refer to "Safety information" chapter.

Automatic Programmes

For an automatic programme, refer to the recipes in "Automatic programmes".

Setting a programme

1. If it is necessary, touch

2. Touch

3. Touch

– The display shows the automatic weight " gr " and flashing duration symbol

– Touch

maximum 1000 g).

– When you change the weight, the Microwave duration time changes automatically.

Always set the lower weight. For example, if bread weight is 460 g, set 400 g.

4. Touch

When the set time ends, an acoustic signal sounds for 2 minutes. The symbol

The appliance stops automatically. Touch a control to stop the acoustic signal.

With some programmes, after the end of Microwave duration function, the Keep Warm

function activates automatically. An acoustic signal sounds and the display shows "HH".

Memory function

Use the Memory function to save one favourite setting.

1. Set the oven function, temperature and the clock functions: Duration

2. Touch and hold

firmed.

Activating the Memory function

1. If it is necessary, touch

2. Touch

to set the time.

to deactivate the appliance.

to access the automatic programmes menu.

to set an automatic programme (P1 to P12).

to set the weight of the food from 100 g to 1500 g (P5 to P12

to activate the programme.

for 2 seconds until an acoustic signal sounds. The setting is con-

to deactivate the appliance.

to set the saved setting.

flashes.

and/or End