Garmin GHP 10 Marine Autopilot System Manuale di istruzioni per l'installazione - Pagina 12

Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Sistema GPS marino Garmin GHP 10 Marine Autopilot System. Garmin GHP 10 Marine Autopilot System 48. Tachometer reference
Anche per Garmin GHP 10 Marine Autopilot System: Manuale di avvio rapido (21 pagine), Manuale di istruzioni per l'installazione (26 pagine), Riferimento tecnico (42 pagine), Dichiarazione di conformità (1 pagine), Riferimento (1 pagine)

Stampa la pagina
Garmin GHP 10 Marine Autopilot System Manuale di istruzioni per l'installazione
Hydraulic Considerations - Compact 2.1 L Pump
Different boats have different hydraulic considerations you must examine before mounting the pump or disconnecting any hoses.
Before starting the hydraulic installation, verify the type of hydraulic steering in your boat, and where to install the appropriate type of
pump.
If the hydraulic steering of your boat does not match the hydraulic layouts in this manual, contact Garmin Product Support.
Compact 2.1 L Pump Hydraulic Layout on Single-Helm Boats
Balanced cylinder
Starboard fitting
Do not turn the system on until you bleed all the air from the helm, the Shadow Drive, the pump, and all the hydraulic lines.
See
page
34.
1
Port fitting
Helm
Compact .1 L
pump (and motor)
Port line
Return line
Starboard line
Shadow Drive
Notice
notes:
notes:
•
•
Compact 2.1 L pump (and motor):
Compact 2.1 L pump (and motor):
◦
◦
◦
◦
•
•
Shadow Drive:
Shadow Drive:
◦
◦
◦
◦
P R S
◦
◦
◦
◦
◦
◦
◦
◦
Notice
to use the compact 2.1 L pump on a system
to use the compact 2.1 L pump on a system
with an unbalanced cylinder, follow the
with an unbalanced cylinder, follow the
procedures on
procedures on
page
page
24.
24.
Mount the pump horizontally if possible. Do not
Mount the pump horizontally if possible. Do not
mount the pump vertically with the pump end
mount the pump vertically with the pump end
(hydraulic connections) down.
(hydraulic connections) down.
Mount the Shadow Drive horizontally and as
Mount the Shadow Drive horizontally and as
level as possible.
level as possible.
Install the Shadow Drive in either the port or the
Install the Shadow Drive in either the port or the
starboard hydraulic line.
starboard hydraulic line.
Always install a length of hose between the helm
Always install a length of hose between the helm
and the Shadow Drive.
and the Shadow Drive.
Do not install the Shadow Drive directly to the
Do not install the Shadow Drive directly to the
helm.
helm.
Install the Shadow Drive between the pump and
Install the Shadow Drive between the pump and
the helm.
the helm.
Do not install the Shadow Drive between the
Do not install the Shadow Drive between the
pump and the cylinder.
pump and the cylinder.
GHP 10 Marine Autopilot System Installation Instructions