AEG NC7013001 Manuale d'uso - Pagina 25

Sfoglia online o scarica il pdf Manuale d'uso per Forno AEG NC7013001. AEG NC7013001 28.
Anche per AEG NC7013001: Manuale d'uso (28 pagine)

Stampa la pagina

12. TROUBLESHOOTING

12.1 What to do if...

Problem

The cooking zones do not

operate.

The oven does not heat up.

The lamp does not operate.

It takes too long to cook the

dishes or they cook too

quickly.

Steam and condensation

settle on the food and in the

cavity of the oven.

The display shows an error

code that is not in this table.

12.2 Service data

If you cannot find a solution to the

problem yourself, contact your dealer or

an Authorised Service Centre.

WARNING!

Refer to Safety chapters.

Possible cause

Refer to the operating instructions for the built-in cooking

surface.

The oven is deactivated.

The clock is not set.

The necessary settings are

not set.

The automatic switch-off is

activated.

The Child Lock is on.

The fuse is released.

The lamp is defective.

The temperature is too low

or too high.

You left the dish in the oven

for too long.

There is an electrical fault.

The necessary data for the service centre

is on the rating plate. The rating plate is

on the front frame of the appliance

cavity. Do not remove the rating plate

from the appliance cavity.

ENGLISH

Remedy

Activate the oven.

Set the clock.

Make sure that the settings

are correct.

Refer to "Automatic switch-

off".

Refer to "Using the Child

Lock".

Make sure that the fuse is

the cause of the malfunction.

If the fuse releases again

and again, contact a quali-

fied electrician.

Replace the lamp.

Adjust the temperature if

necessary. Follow the advice

in the user manual.

Do not leave the dishes in

the oven for longer than 15 -

20 minutes after the cooking

process ends.

• Deactivate the oven with

the house fuse or the

safety switch in the fuse

box and activate it again.

• If the display shows the

error code again, contact

the Customer Care De-

partment.