Wiring Additional NMEA 0183 Devices
The NMEA 0183 data cable included with the GPSMAP 6000/7000 series chartplotter supports the NMEA 0183 standard, which is used to wire
various NMEA 0183-compliant devices, such as VHF radios, NMEA instruments, autopilots, or a computer.
Basic NMEA 0183 Wiring
These diagrams illustrate basic NMEA 0183 wiring used to connect your GPSMAP 6000/7000 series chartplotter to NMEA 0183-compliant
devices such as an AIS or DSC device. For more-complete information on the NMEA 0183 capabilities of the GPSMAP 6000/7000 series
chartplotter, see the "Advanced NMEA 0183 Wiring" section
Garmin
GPSMAP 6000/7000 series
chartplotter
Garmin
GPSMAP 6000/7000 series
chartplotter
Notes:
• If the NMEA 0183-compliant device has only one receiving wire (no A, B, +, or -), leave the pink wire unconnected.
• If the NMEA 0183-compliant device has only one transmitting wire (no A, B, +, or -), connect the orange/white wire to ground.
• Consult the installation instructions of your NMEA 0183-compliant device to identify the Transmit A(+) and B(-) wires and Receive A(+)
and B(-) wires.
• Use 28 AWG, shielded, twisted-pair wiring for extended runs of wire.
• Solder all connections and seal them with heat-shrink tubing.
12
(page
13).
WIRE CoLoR
FuSE
7.5 A - 42 v
RED (PoWER)
PoWER
BLACk (PWR GND)
CABLE
BLACk (DAtA GND)
WHItE
>
NMEA 0183
CABLE
oRANGE/WHItE
>
GRAY
>
PINk
>
Wiring to a NMEA 0183-compliant Device (AIS)
WIRE CoLoR
FuSE
7.5 A - 42 v
RED (PoWER)
PoWER
BLACk (PWR GND)
CABLE
BLACk (DAtA GND)
oRANGE/WHItE
>
NMEA 0183
WHItE
CABLE
>
GRAY
>
PINk
>
Wiring to a Single-ended NMEA 0183-compliant Device
-
+
BAttERY
10–35 vdc
WIRE
RED (PoWER)
BLACk (PWR GND)
BLACk (DAtA GND)
tRANSMIt A(+)
tRANSMIt B(-)
RECEIvE A(+)
RECEIvE B(-)
-
+
BAttERY
10–35 vdc
WIRE
RED (PoWER)
BLACk (PWR GND)
BLACk (DAtA GND)
tRANSMIt
RECEIvE
uNCoNNECtED
GPSMAP 6000/7000 Series Installation Instructions
NMEA 0183-compliant
device
(AIS)
>
>
>
>
NMEA 0183-compliant
device
>
>
Stampa la pagina