AEG 645 Manuale di istruzioni per l'uso - Pagina 18

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Lavastoviglie AEG 645. AEG 645 24. Dishwasher
Anche per AEG 645: Manuale di istruzioni per l'uso (25 pagine), Manuale di istruzioni per l'uso (40 pagine), Manuale di istruzioni per l'uso (24 pagine)

If you think your machine is not working properly

• If the machine is connected to a hot fill

supply (max. 60 °C) - only economical if

hot water is available 'nearly free of

charge" - do not use 50° C programmes to

allow detergent sufficient time to work.

• Did you top up the salt container? If the

water hardness in your area is over

10 degrees and your dishwasher is operat¬

ed without salt, the result may be affected

adversley and white and yellow chalk

deposits will remain on your dishes.

• Did you select the correct degree of water

hardness according to the information of

your local Water Authority? (See also

page 10.)

The dishes are not dry and sparkling?

• Did you use a rinse aid recommended

by us?

• Did you fill up the rinse aid container?

• Is the correct quantity of rinse aid being

dispensed?

Overdosing of rinse aid:

If too much rinse aid is used opaque or bluish

smears will apear. Reduce the output

Underdosing of rinse aid:

If too little rinse aid is used white/grey dried-on

water marks will appear. Increase the output

There are rust spots in the machine?

• The stainless steel tub, the inner door and

the filters cannot rust. If you find rust spots,

these are introduced with the water or due

to rust on cutlerly, saucepans, etc. Did you

select a rinse and hold programme or a

complete wash programme after filling the

salt container? Remove such stains with a

stainless steel cleaner.

Symbol £=> is illuminated

• Unless you live in water hardness area 1,

the salt container needs to be replenished.

For water hardness area 1 the light will be

on every time the machine is switched on.

No salt is required for water hardness

area 1 - see page 10.