Garmin GSD 20 Manuale di installazione - Pagina 10
Sfoglia online o scarica il pdf Manuale di installazione per Sistema GPS marino Garmin GSD 20. Garmin GSD 20 12. Sounder module
Anche per Garmin GSD 20: Caratteristiche (2 pagine)
Installation
Specifi cations
Note: When using the GPS Chartplotter and GSD
20 on battery power only (engines off) for extended
periods of time, be sure there are enough available
amperage to run the units for the time period. Running
other onboard devices at the same time may lower
the available amperage causing the GPS Chartplotter
and/or GSD to shut off. Check with your local marine
dealer/installer if problems persist.
Warning: This product, its packaging, and its
components contain chemicals known to the State of
California to cause cancer, birth defects, or reproductive
harm. This Notice is being provided in accordance with
California's Proposition 65. If you have any questions
or would like additional information, please refer to our
web site at www.garmin.com/prop65.
8
Physical Specifi cations
Size:
6.75" L x 4.75" W x 2.00" H
(17.2cm x 12.1cm x 5.1cm)
Weight:
1.5 lbs. (.680Kg)
Case:
Fully gasketed, high-impact plastic and
aluminum alloy, waterproof to IEC 529-IPX-7
Temp Range:
5°F to 158°F (-15°C to 70°C)
Power
Source:
10-35 Vdc
Usage:
18 watts max.
Fuse:
AGC/3AG - 2.0 Amp
Sonar
Sounder Power: 500 watts (RMS)
4000 watts (peak to peak)
Frequency:
50/200 kHz
Depth:
1500 foot max depth*
* Depth capacity is dependent on water salinity,
bottom type and other water conditions.
Data Output
Source:
Proprietary Garmin data format.