Garmin Boat Switch Manuale di istruzioni per l'installazione - Pagina 20

Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Attrezzatura marina Garmin Boat Switch. Garmin Boat Switch 27. Pre-configured digital switching system

Stampa la pagina
Garmin Boat Switch Manuale di istruzioni per l'installazione
Resistive Tank Sensor 2 (Channel 7)
Device Switch
105
106
107
108
109
Voltage Tank Sensor 1 (Channel 22)
Device Switch
110
111
112
113
114
Voltage Tank Sensor 2 (Channel 23)
Device Switch
115
116
117
118
119
Configuring the Livewell Automatic Pump Cycle Settings
When activated, a connected livewell pump runs for 1 minute and stops. By default, this device activates the
livewell every 5 minutes, and the activation cycle time can be configured. You can change this value to 1, 3, 5, 7,
9 11, 13, or 15 minutes.
NOTE: You can bypass this activation cycle and set the pump to run continuously by holding the livewell switch
on the Garmin chartplotter for 3 seconds. When bypassed, the pump runs continuously until stopped.
1 Connect the SWITCH INPUT: LIVEWELL CYCLE ADJ wire to a common ground for three seconds.
The runtime-cycle setting changes to the next higher delay. The screen displays the new time between
cycles.
2 Repeat the previous step to increase the delay up to a maximum of 15 minutes.
NOTE: When the live-well pump cycle is set to 15 minutes, you must connect the SWITCH INPUT: LIVEWELL
CYCLE ADJ wire to a common ground for three seconds to set the runtime to back to 1 minute.
20
NMEA 2000 Fluid Type
Fuel (Default)
Fresh Water
Waste Water
Black Water
Live Well
NMEA 2000 Fluid Type
Fuel (Default)
Fresh Water
Waste Water
Black Water
Live Well
NMEA 2000 Fluid Type
Fuel (Default)
Fresh water
Waste water
Black water
Live well
NMEA 2000 PGN
127505
127505
127505
127505
127505
NMEA 2000 PGN
127505
127505
127505
127505
127505
NMEA 2000 PGN
127505
127505
127505
127505
127505
NMEA 2000 Instance
1
1
1
1
1
NMEA 2000 Instance
2
2
2
2
2
NMEA 2000 Instance
3
3
3
3
3