Garmin FUSION Apollo MS-WB670 Manuale d'uso - Pagina 39
Sfoglia online o scarica il pdf Manuale d'uso per Attrezzatura marina Garmin FUSION Apollo MS-WB670. Garmin FUSION Apollo MS-WB670 44. Marine hideaway stereo
Anche per Garmin FUSION Apollo MS-WB670: Manuale di istruzioni per l'installazione (19 pagine)
Stampa la pagina
Updating the Software Using the Fusion Link App
You must connect the Fusion-Link app to the network using a wireless router or wireless access point to update
the software. You cannot update the software using a Bluetooth connection.
NOTE: If the stereo you want to update is in a group, you must remove it from the group
page
22).
If the Fusion PartyBus network has a wireless router or wireless access point, you can update the stereo
software using the Fusion-Link app, available for compatible Apple or Android on the Apple App Store or the
Google Play store.
Do not turn off the device or disconnect the power during a software update. Turning off the power during a
software update may cause the device to become unresponsive.
NOTE:
• The device may restart a few times while updating the software. This is expected behavior.
• You can program only newer versions of software on the device.
1 Connect your mobile device to a wireless router or wireless access point on the Fusion PartyBus network.
2 Open the Fusion-Link app, and verify that you can see the stereo in the app.
3 If the Fusion PartyBus network is not connected to the internet, disconnect the mobile device from the
wireless router or access point.
4 In the Fusion-Link app, select
5 Select the stereo.
6 Select Download.
The app downloads the software update file.
7 If the Fusion PartyBus network is not connected to the internet, after the app finishes downloading the
update file, reconnect the mobile device to the wireless router or access point on the Fusion PartyBus
network.
8 In the Fusion-Link app, reconnect to the stereo.
9 Select
> GENERAL > Software Updates > Online Software Update.
The app transfers the software update to the stereo over the Wi‑Finetwork, the stereo updates the software,
and then it restarts.
The
LED flashes four times and repeats while the software update is in progress.
Troubleshooting
The stereo does not respond to key presses
• Hold
until the stereo turns off, and turn it on again to reset the stereo.
• Disconnect power to the stereo for two minutes to reset the stereo.
My Bluetooth audio is interrupted by short breaks
• Ensure the media player is not covered or obstructed.
Bluetooth technology performs best with line-of-sight operation.
• Bring the media player within 10 m (33 ft.) of the stereo.
• Turn off the DISCOVERABLE setting after pairing a Bluetooth device to the stereo.
The stereo does not display all song information from my Bluetooth source
The availability of song information such as song title, artist name, track duration, and album cover artwork
depends on the capability of the media player and music application.
Appendix
NOTICE
> CHECK FOR UPDATES.
(Leaving a Group,
33