Garmin FUSION APOLLO MS-WB675 Manuale - Pagina 31

Sfoglia online o scarica il pdf Manuale per Attrezzatura marina Garmin FUSION APOLLO MS-WB675. Garmin FUSION APOLLO MS-WB675 46. Marine entertainment system
Anche per Garmin FUSION APOLLO MS-WB675: Manuale di istruzioni per l'installazione (19 pagine)

Stampa la pagina

Enabling Group Synchronization

You must remove the stereo from an existing group before you can enable the GROUP SYNC setting. You

cannot update settings when a stereo is part of a group.

You must enable this setting on each stereo that you want to retain group settings after a power cycle.

1 Select

> SETTINGS.

2 Select the name of the stereo.

3 Select POWER OPTIONS > GROUP SYNC.

The stereo retains group settings after a power cycle.

4 Repeat for additional stereos as needed.

NOTE: You must enable GROUP SYNC on all networked stereos for synchronization to work properly.

NOTE: When the stereo is in a group, you cannot change the settings on that stereo.

Select

> SETTINGS, and select the name of the stereo.

NOTE: When a check box is filled, the option is on. When the check box is clear, the option is off.

DEVICE NAME: Sets a name for this device.

TUNER REGION: Sets the region used by the FM and AM sources.

This setting is also needed to configure DAB and SiriusXM sources.

TELEMUTE: Sets the behavior of the stereo when it detects a signal on the TELEMUTE wire in the wiring

harness. This is commonly used to change to the Aux source when you hold the button on a Fusion handheld

microphone. You can also choose to either mute the audio or change to the Aux source when connected

to a hands-free mobile phone kit. See yourFusion handheld microphone or hands-free mobile phone kit

instructions for more information.

NOTE: This setting does not affect a phone connected to the stereo using Bluetooth technology.

POWER OPTIONS: Adjusts the power settings, such as the power-save mode.

SEARCHING: Enables Fusion Alpha Search Technology (FAST), which allows you to quickly search for tracks by

letter or number. You can select a number to enable the FAST menu if your music device contains more than

the selected number of items.

ZONE: Enables you to configure the speaker zones

SOURCE: Allows you to enable, disable, and name the sources on the stereo

NETWORK: Enables you to configure the Fusion PartyBus network settings

UPDATE: Updates the stereo or connected devices using the appropriate update file on a connected USB flash

drive

(Update Options,

NOTE: It is not necessary to use this menu if you are updating the software using the Fusion-Link app on a

mobile device instead of using an update file loaded onto a USB flash drive

Fusion Link App,

page 34).

UPDATE > FACTORY RESET: Restores all settings to the factory default values.

ABOUT: Shows the software version information for the stereo.

Speaker Zone Settings

Disabling the Internal Amplifier

If you do not connect speakers directly to zones 1 and 2, you can disable the internal amplifier to reduce power

consumption.

1 Select

> SETTINGS.

2 Select the name of the stereo.

3 Select ZONE.

4 Select INTERNAL AMP ON to clear the check box.

General Settings

page 31).

(Speaker Zone Settings,

page 25).

(Network Settings,

(Source Settings,

page 29).

(Updating the Software Using the