Garmin Gladiator TR-1 Manuale d'uso - Pagina 10

Sfoglia online o scarica il pdf Manuale d'uso per Attrezzatura marina Garmin Gladiator TR-1. Garmin Gladiator TR-1 36. Garmin tr-1 marine autopilot: user guide
Anche per Garmin Gladiator TR-1: Manuale d'installazione e d'uso (4 pagine), Manuale d'uso (13 pagine)

Stampa la pagina

buttons.

When you select special functions, by the methods described below, you are simply choosing

which function is to be executed by the pilot when you push one of the three special function

The Plus button is programmable to provide either MOB, ZigZags, or Rudder. The Left

buttons.

Chevron button is programmable to provide either Steps, Circles, or U Turns. The Right

Chevron button is programmable to provide Waypoint Orbiting, Clover Leaf, or Search steering

The Plus button is programmable to provide either MOB, ZigZags, or Rudder. The Left

in conjunction with your GPS.

When you select special functions, by the methods described below, you are simply choosing which

Chevron button is programmable to provide either Steps, Circles, or U Turns. The Right

function is to be executed by the pilot when you push one of the three special function buttons below.

Chevron button is programmable to provide Waypoint Orbiting, Clover Leaf, or Search steering

To change the functions of these programmable buttons, follow the directions below.

in conjunction with your GPS.

The [Plus (+) ] button is programmable to provide either MOB, Zig Zags, or Rudder. The [Left

1. Autopilot must be in Heading Hold or Standby Mode before selection process can start.

Chevron] button is programmable to provide either Steps, Circles, or U-Turns. The [Right Chevron]

To change the functions of these programmable buttons, follow the directions below.

(AUTO LED solid on or STBY LED solid on. No other LED's on.)

button is programmable to provide Waypoint Orbiting, Clover Leaf, or Search Steering in conjunction

with your GPS.

1. Autopilot must be in Heading Hold or Standby Mode before selection process can start.

2. Press and hold the Setup button. Three LED's next to the numbers 1 through 9 will

(AUTO LED solid on or STBY LED solid on. No other LED's on.)

illuminate, indicating which (3) special functions are programmed to operate. For example, if

To change the functions of these programmable buttons, follow the directions below.

LED's 1, 4, and 7 illuminate, your system is programmed to do: 1) MOB when the Plus button is

2. Press and hold the Setup button. Three LED's next to the numbers 1 through 9 will

1. Autopilot must be in Heading Hold or Standby Mode before selection process can start. (Auto LED

pressed. 2) Step Turns to port when the Left Chevron button is pressed. 3) Step Turns to

illuminate, indicating which (3) special functions are programmed to operate. For example, if

solid on or STBY LED solid on. No other LED's on.)

starboard when the Right Chevron button is pressed. 4) Orbit a waypoint clockwise when the

LED's 1, 4, and 7 illuminate, your system is programmed to do: 1) MOB when the Plus button is

Right Chevron button is pressed and the system is tracking a GPS signal. 5) Orbit a waypoint

pressed. 2) Step Turns to port when the Left Chevron button is pressed. 3) Step Turns to

2. Press and hold the [Setup] button. Three LED's next to the numbers 1 through 9 will illuminate,

counterclockwise when the Left Chevron button is pressed and the system is tracking a GPS

starboard when the Right Chevron button is pressed. 4) Orbit a waypoint clockwise when the

indicating which (3) special functions are programmed to do, the factory defaults are: 1) MOB when

signal.

Right Chevron button is pressed and the system is tracking a GPS signal. 5) Orbit a waypoint

the [Plus (+)] button is pressed. 2) Step Turns to port when the [Left Chevron] button is pressed. 3)

counterclockwise when the Left Chevron button is pressed and the system is tracking a GPS

Step Turns to starboard when the [Right Chevron] button is pressed. 4) Orbit a waypoint clockwise

signal.

3. Select the Special Function you want to use by pressing and releasing the Plus and/or

when the [Right Chevron] button is pressed and the system is tracking a GPS signal. 5) Orbit a

Chevron buttons until the appropriate LED's are lit. See Special Function Indicators LED

waypoint counterclockwise when the [Left Chevron] button is pressed and the system is tracking a

3. Select the Special Function you want to use by pressing and releasing the Plus and/or

Numbers tables below.

GPS signal.

Chevron buttons until the appropriate LED's are lit. See Special Function Indicators LED

Numbers tables below.

4. Release the Setup Button.

3. Select the Special Function you want to use by pressing and releasing the [Plus (+)] and/or Chevron

If you press and release the Down Arrow button while the autopilot is in heading hold mode,

buttons until the appropriate LED's are lit. See Special Function Indicators LED Numbers tables

4. Release the Setup Button.

the heading at the instant the button is pressed becomes the stored heading. Subsequently, while

below.

If you press and release the Down Arrow button while the autopilot is in heading hold mode,

you are in heading hold (at any heading), pressing and releasing the Up Arrow button will cause

the heading at the instant the button is pressed becomes the stored heading. Subsequently, while

the autopilot to steer to the stored heading.

4. Release the [Setup] button.

you are in heading hold (at any heading), pressing and releasing the Up Arrow button will cause

the autopilot to steer to the stored heading.

5. To make the selected Special Functions into start up defaults: Press and release the Setup

To make the selected Functions into startup defaults (save the changes into permanent memory):

button (the setup LED should be lit), then press and hold the GPS (Select Load) button, verify

Press and release the [Setup] button (the [Setup] LED should be lit), and then press and hold

5. To make the selected Special Functions into start up defaults: Press and release the Setup

that the Load LED is lit, and then press and release the DM button, then release the GPS

the [Select Load] button. While holding down the [Select Load] button, press and release the

button (the setup LED should be lit), then press and hold the GPS (Select Load) button, verify

(Select Load)button

[Deckmount] On/Off button quickly, then release the GPS [Select Load] button.

that the Load LED is lit, and then press and release the DM button, then release the GPS

(Select Load)button

SPECIAL FUNCTION INDICATOR LED NUMBERS

Following the directions above, you will be able to access all of the Special Pattern Functions

SPECIAL FUNCTION INDICATOR LED NUMBERS

listed below on your handheld.

MOB

ZigZag

Rudder

Selecting Patterns

Pattern Indicator LED Numbers

Steps

Circles

U Turn

Orbit

Orbits

Orbit

3 Leaf Clover

Clover Leaf

3 Leaf Clover