Garmin GPS 17x Specifiche tecniche - Pagina 14
Sfoglia online o scarica il pdf Specifiche tecniche per Attrezzatura marina Garmin GPS 17x. Garmin GPS 17x 34. Declaration of conformity
Anche per Garmin GPS 17x: Manuale di configurazione (2 pagine), Manuale di istruzioni per l'installazione (48 pagine), Importanti informazioni sulla sicurezza (48 pagine), Dichiarazione di conformità (1 pagine)
Stampa la pagina
4.1.2
Sensor Initialization Information (PGRMI)
The PGRMI sentence provides information used to initialize the GPS sensor's set position and time used for satellite
acquisition. Receipt of this sentence by the GPS sensor causes the software to restart the satellite acquisition process.
If there are no errors in the sentence, it will be echoed upon receipt. If an error is detected, the echoed PGRMI
sentence will contain the current default values. Current PGRMI defaults (with the exception of the Receiver
Command, which is a command rather than a mode) can also be obtained by sending the sentence "$PGRMIE" to
the GPS sensor.
$PGRMI,<1>,<2>,<3>,<4>,<5>,<6>,<7>*hh<CR><LF>
<1>
Latitude, ddmm.mmm format for GPS 17x HVS (leading zeros must be transmitted)
<2>
Latitude hemisphere, N or S
<3>
Longitude, ddmm.mmm format for GPS 17x HVS (leading zeros must be transmitted)
<4>
Longitude hemisphere, E or W
<5>
Current UTC date, ddmmyy format
<6>
Current UTC time, hhmmss format for GPS 17x HVS
<7>
Receiver Command, A = Cold Start, R = Unit Reset
4.1.3
Sensor Configuration Information (PGRMC)
The PGRMC sentence provides information used to configure the GPS sensor's operation. Configuration parameters
are stored in non-volatile memory and retained between power cycles. The GPS sensor will echo this sentence upon
its receipt if no errors are detected. If an error is detected, the echoed PGRMC sentence will contain the current
default values. Current default values can also be obtained by sending the sentence "$PGRMCE" to the GPS sensor.
$PGRMC,<1>,<2>,<3>,<4>,<5>,<6>,<7>,<8>,<9>,<10>,<11>,<12>,<13>,<14>*hh<CR><LF>
<1>
Fix mode, A = Automatic, 3 = 3D exclusively
<2>
Altitude above/below mean sea level, -1500.0 to 18000.0 meters
<3>
Earth datum index. If the user datum index (96) is specified, fields <4> through <8> must contain
valid values. Otherwise, fields <4> through <8> must be null. Refer to
for a list of earth datum and the corresponding earth datum index.
<4>
User earth datum semi-major axis, 6360000.000 to 6380000.000 meters (.001 meters resolution)
<5>
User earth datum inverse flattening factor, 285.0 to 310.0 (10
<6>
User earth datum delta x earth centered coordinate, -5000.0 to 5000.0 meters (1 meter resolution)
<7>
User earth datum delta y earth centered coordinate, -5000.0 to 5000.0 meters (1 meter resolution)
<8>
User earth datum delta z earth centered coordinate, -5000.0 to 5000.0 meters (1 meter resolution)
<9>
Differential mode, A = Automatic (output DGPS data when available, non-DGPS otherwise), D =
Differential exclusively (output only differential fixes)
<10>
NMEA 0183 Baud rate, 1 = 1200, 2 = 2400, 3 = 4800, 4 = 9600, 5 = 19200, 6 = 300, 7 = 600, 8 =
38400
<11>
Velocity filter, 0 = No filter, 1 = Automatic filter, 2 to 255 = Filter time constant (e.g. 10 = 10 second
filter)
<12>
Measurement Pulse Output, 1 = Disabled, 2 = Enabled
<13>
Measurement Pulse Output pulse length, (n+1)*20 ms
n = 0 through 48 (max. 980 ms)
Example: n = 4 corresponds to a 100 ms wide pulse
<14>
Dead reckoning valid time 1 to 30 sec. for the GPS 17x HVS
All configuration changes take effect after receipt of a valid value except baud rate. Baud rate changes take effect on
the next power cycle or an external reset event.
190-00885-07
GPS 17x HVS Technical Specifications
Page 10
Appendix A: Earth Datum List
-9
resolution)
Rev. A