AEG FAVORIT 40360 I Istruzioni per l'utente - Pagina 23

Sfoglia online o scarica il pdf Istruzioni per l'utente per Lavastoviglie AEG FAVORIT 40360 I. AEG FAVORIT 40360 I 40. Aeg dishwasher user manual

Starting the Wash Programme

1. Ensure that when the dishes and cutlery are loaded in the dishwasher

the spray arms are free to rotate.

2. Open the water tap fully.

3. Close the dishwasher door.

4. Turn the programme switch clockwise to A or B (see "Programme

Table").

For reasons of interference suppression, only operate the programme

switch with the dishwasher switched off. The automated addition of

detergent could also be triggered.

5. Turn the programme selector to the required programme (see "Pro-

gramme Table").

The selected wash programme will start. The programme switch rotates

during the wash programme and indicates the position that has been

reached in the programme.

If a wash programme has been started but the tap was closed, turn the

programme selector to the I position, open the tap and start the pro-

gramme again.

Only change or interrupt a wash programme in progress if it is abso-

lutely necessary. When the appliance is closed again, the air that has

entered is heated rapidly and expands. As a result water may penetrate

the base of the appliance and trigger the anti-flood system.

Changing the wash programme

1. Turn the programme selector to the I position. The wash programme

will stop.

Hot steam can escape from the appliance when the door is opened.

Open the door carefully.

2. Open dishwasher door and check whether there is still detergent in the

container. Refill the container if necessary.

3. Close the dishwasher door.

4. Turn the programme switch clockwise to A or B (see "Programme

Table").

5. Turn the programme selector to the required programme (see "Pro-

gramme Table"). The wash programme will start.

Operating Instructions