AEG FAVORIT 43050 i Istruzioni per l'utente - Pagina 11

Sfoglia online o scarica il pdf Istruzioni per l'utente per Lavastoviglie AEG FAVORIT 43050 i. AEG FAVORIT 43050 i 44. Aeg dishwasher

Adjust the water softener to the setting given in the table that corre-

sponds to the hardness of the water in the area where you live.

It is only possible to adjust the water hardness setting when there is no

programme running. If you have inadvertently started a programme

(an LED indicator is constantly illuminated), then the programme must

be cancelled by pressing the appropriate button.

1. The appliance must be switched off.

2. Press the water-softener and function buttons simultaneously and

keep them pressed.

3. In addition press the ON/OFF button.

4. The LED indicator for the water-softener button flashes.

5. Press the water-softener button again.

– The LED indicator for the water-softener button will be continuously

illuminated for an initial 5 seconds and then begin to flash.

– The number of flashes corresponds to the hardness setting.

– The sequence of flashes is repeated several times after a 5 second

pause.

6. Each time you press the water-softener button the hardness setting

will go up by 1.

(Exception: Hardness setting 1 follows hardness setting 5).

– If the hardness setting is changed, the LED indicator for the water-

softener button will confirm the change by remaining illuminated

continuously for 5 seconds and then flashing again.

– The number of flashes corresponds to the new hardness setting.

– The sequence of flashes is repeated several times after a 5 second

pause.

7. Once the hardness setting is correct, press the ON/OFF switch.

The hardness setting is then saved.

Operating Instructions