AEG FAVORIT 50610 Istruzioni per l'utente - Pagina 12

Sfoglia online o scarica il pdf Istruzioni per l'utente per Lavastoviglie AEG FAVORIT 50610. AEG FAVORIT 50610 48. 50610
Anche per AEG FAVORIT 50610: Istruzioni per l'utente (44 pagine)

AEG FAVORIT 50610 Istruzioni per l'utente
Operating Instructions

Special salt for the water softener

If the water hardness in your area is less than 4 °d, then the water in
3
your dishwasher does not need to be softened and you do not need to
use special salt or salt substitute.
Water can be softened in one of two ways:
• If you are using dishwasher detergent that already contains salt sub-
stitute, the detergent only is put into the detergent compartment.
– In this case the water softener must manually be set to 0 and
electronically to 1 to ensure that no special salt is added.
• If you are using dishwasher detergent and special salt separately, the
special salt is to be put into the salt container.
– In this case the water softener must manually be set to 0 and
electronically to between 2 and 10 (depending on the water
hardness in your area) to ensure that the special salt is dispensed
from the salt container.
Only use special salt intended for dishwashers. Never fill the salt supply
1
container with different types of salt (e.g. cooking or table salt) or
detergent. This would destroy the water softener.
Prior to filling with salt, please check each time that you really do have
a packet of special salt in your hand.

Setting the amount of special salt to be added

Some appliances are equipped with an additional 3 in 1 function.
3
If you use 3-in-1 dishwashing tablets and select the 3 in 1 function
together with the programme, the inflow of special salt does not have
to be deactivated (see "3 in 1 function").
1. Set the water softener manually and electronically to the desired water
0
hardness:
Manual
setting
0
0 - 1
If the water softener is electronically set at "1" for the purpose of using
3
detergent that includes special salt, the special salt indicator is deacti-
vated.
12
Electronic
Number
setting
of flashes
1
2-10
2 to 10
Addition of special salt
1
Do not add special salt.
Addition of special salt
via salt container
(factory setting)