Garmin PRO Control 2 HH Manuale d'uso - Pagina 5
Sfoglia online o scarica il pdf Manuale d'uso per Prodotto per la cura degli animali domestici Garmin PRO Control 2 HH. Garmin PRO Control 2 HH 12.
Anche per Garmin PRO Control 2 HH: Manuale d'uso (12 pagine)
Stampa la pagina
Introduction
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
Charging the Handheld Device
To prevent corrosion, thoroughly dry the USB port, the weather
cap, and the surrounding area before charging or connecting to
a computer.
You should fully charge the battery before you use the device for
the first time. Charging a fully depleted battery takes about 2
hours.
NOTE: The device does not charge when it is outside the
temperature range of 0° to 40°C (32° to 104°F).
1
Lift the weather cap
.
2
Plug the small end of the power cable into the mini-USB port
on the device.
3
Plug the other end of the power cable into an appropriate
power source.
The LCD display on the handheld device shows the current
battery charge level. Charging is complete when the battery
charge level icon stops flashing.
Turning the Handheld Device On or Off
The handheld device turns off automatically after you have not
used it for one hour. You cannot turn off the device manually.
NOTE: The device and LCD use very little power while the
device is not transmitting, and the one-hour delay does not
significantly impact battery life.
Select any key to turn on the device.
The LCD turns on, and the device keys can be used
immediately.
Selecting an Operating Mode
The PRO Control 2 handheld device operates in either remote
control mode or dog training mode. The features, display, and
key functions change based on the mode.
Select MODE to switch the operating mode.
If a training mode indicator appears at the bottom of the display
(Dog Training
Display), the device is in dog training mode.
Remote Control
The PRO Control 2 handheld device can control up to 18
compatible PRO Control series receivers. A PRO Control series
receiver can activate several brands of third-party devices,
including remote launchers, remote releasers, and other remote
accessories. Each receiver includes a speaker to play a sound
and two ports to connect remote devices.
Introduction
WARNING
NOTICE
Your PRO Control 2 handheld device can remotely activate the
sound and two remote devices on each receiver. You can also
use the rapid launch feature to activate multiple devices in rapid
succession.
Remote Control Keys
Select to use rapid launch.
Select to switch to dog training mode.
Select to play the receiver sound.
Select to activate the left port of the receiver.
Select to activate the right port of the receiver.
Select to change the active receiver.
Remote Control Display
Selected receiver
Battery charge level
Pairing with a PRO Control G Series
Receiver
Before you can control your receiver with your PRO Control 2
handheld device, you must pair the receiver with the handheld
device.
1
On the handheld device, select
number with which to pair the receiver.
TIP: The selected number determines the sound played by
receiver when you select
Sounds).
2
If necessary, turn on the receiver.
3
On the receiver, select SET.
The red LED is solid when the receiver is in pairing mode.
4
Within five seconds, select
The red LED on the receiver flashes and turns off.
The receiver is paired with the selected number on the handheld
device.
or
to choose the
(PRO Control G Series Receiver
on the handheld device.
1