LG 230/208V Manuale di servizio - Pagina 14

Sfoglia online o scarica il pdf Manuale di servizio per Telefono cellulare LG 230/208V. LG 230/208V 35. Lg service manual room air conditioner

2.4 REFRIGERATION CYCLE

CAUTION

Discharge the refrigerant system using Freon

Recovery System.

If there is no valve to attach the recovery system,

install one (such as a WATCO A-1) before

venting the Freon

after servicing the system.

1. Remove the brace and the shroud.

(Refer to section 2.2.2)

2. Remove the 4 screws which fasten the shroud.

(Refer to section 2.2.2)

3. Push forward the shroud and remove the 2 screws

which fasten the condenser with the basepan.

4. After discharging the refrigerant completely,

unbraze the interconnecting tube at the condenser

connections.

5. Remove the condenser.

6. Re-install the components by referring to notes.

(See Fig. 14)

1. Remove the front grille. (Refer to section 2.1.1)

2. Discharge the refrigerant completely.

3. Remove the control box assembly.

(Refer to section 2.1.2)

4. Remove the 4 screws which fasten the evaporator

at the left side and the right side.

5. Move the evaporator sideward carefully and then

unbraze the interconnecting tube at the evaporator

connectors.

6. Remove the evaporator.

7. Re-install the components by referring to notes.

(See Fig. 15)

1. After discharging the refrigerant completely,

unbraze the interconnecting tube at the capillary

tube.

2. Remove the capillary tube.

3. Re-install the components by referring to notes.

. Leave the valve in place

Figure 14

Figure 15

—14—