Brother DCP-7030 Manuale di configurazione rapida - Pagina 22
Sfoglia online o scarica il pdf Manuale di configurazione rapida per Stampante All in One Brother DCP-7030. Brother DCP-7030 32. Quick setup guide - spanish
Anche per Brother DCP-7030: Manuale di configurazione rapida (20 pagine), Manuale di configurazione rapida (18 pagine), Manuale di configurazione rapida (19 pagine), Manuale di configurazione rapida (32 pagine), (Inglese) Guida alla configurazione rapida (20 pagine)
Stampa la pagina
STEP 2
Installing the Driver & Software
For USB Interface Cable Users
3
For Mac OS X 10.2.4 or greater
Important
Make sure that you have finished the
instructions from step 1 Setting Up the
Machine on pages 8 through 11.
Note
For Mac OS X 10.2.0 to 10.2.3 users, upgrade to
Mac OS X 10.2.4 or greater. (For the latest
information for Mac OS X, visit
http://solutions.brother.com)
1
Plug the AC power cord into an AC outlet. Turn
the power switch on.
2
Remove the label covering the USB interface
socket.
3
Connect the USB interface cable to your
computer, and then connect it to the machine.
20
1
2
Improper Setup
DO NOT connect the machine to a USB port on
a keyboard or a non-powered USB hub.
Brother recommends that you connect the
machine directly to your computer.
4
Turn on your Macintosh.
5
Put the supplied CD-ROM for Macintosh into
your CD-ROM drive.
6
Double-click the Start Here OSX icon to install.
Follow the on-screen instructions.
Note
• Please see the Software User's Guide on the
CD-ROM to install the PS driver. (DCP-7045N only)
• Please wait, it will take a few seconds for the
software to install. After the installation, click
Restart to finish installing the software.
7
The Brother software will search for the Brother
device. During this time the following screen
will appear.