Fujitsu 8432884555871 Manuale operativo - Pagina 7
Sfoglia online o scarica il pdf Manuale operativo per Condizionatore d'aria Fujitsu 8432884555871. Fujitsu 8432884555871 16.
Stampa la pagina■ Swing operation setting
Press
to start/stop the Swing operation.
)
NOTE: The Swing operation may stop temporarily when the indoor unit
fan is rotating at very low speed or is stopped.
■ Airfl ow direction range
Up/down airfl ow direction
Change by
Swing operation by
1
2
Cooling, Dry
3
Heating
4
Fan *
5
6
* The Swing operation range depends on the airfl ow direction set before
the Swing operation.
NOTES:
• Do not adjust the louver by hand.
• In the Auto or Heating mode, the airfl ow direction stay position 1 for
a while from the start of the operation.
• In the Cooling or Dry mode, position 1-3 is recommended to prevent
condensation drips damaging your property. If position 4-6 keeps for
30 minutes or more in these modes, the airfl ow direction changes to
position 3 automatically.
• When using the mobile app (optional wireless LAN control is
necessary), the up/down airfl ow can be selected from 4 positions.
6. TIMER OPERATIONS
NOTE: When [
] indicator on the indoor unit blinks, set the clock and
timer again. This blinking shows that the internal clock go wrong
due to an interruption of the power supply. (Refer to page 11.)
■ Timer setting procedure
Before setting the timer, adjust the clock. (Refer to "3.3. Inserting
batteries").
1. Press
.
on the remote controller display will blink.
(
)
2. Press
to choose timer operation.
The timer operation will change as follows:
Weekly timer
On timer
[
]
Off timer
[
]
Program timer
[
]
Sleep timer
3. Press
.
4. Set each timer operation.
For details, refer to the following instructions of each timer setting.
5. Press
to complete the timer setting.
Be close to the indoor unit.
• To cancel the timer setting during the procedure, press
again.
1 ⇄ 2 ⇄ 3 ⇄ 4 ⇄ 5 ⇄ 6
1
4
3
6
1
4 or 3
Enables you to set operation
schedules up to 4 setting for each
day of the week.
Starts the operation at your desired
time.
Stops the operation at your desired
time.
Operates as the combination of the
On timer and Off timer.
Supports your comfortable sleep
by moderating the air conditioner
operation gradually.
6.1. Weekly timer
■ Setting details
1. Select Weekly timer in step 2 of "Timer setting procedure".
(
2. Press
day of the week.
Selected program number (1~4) and the day of the week will blink.
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
6
Sunday
3. Press
.
(
4. Press
(Without a timer)
5. Press
.
* When you chose "Without a timer" in step 4, the setting display will
return to step 1.
(
6. Press
7. Press
.
* When you chose "Off timer" in step 4, the setting display will return
to step 1.
(
)
8. Press
Temperature setting range
Auto, Cooling,
18.0-30.0 °C
or Dry mode:
*Even if you set to 10.0, 16.0-17.5 °C, the air
conditioner will run at 18.0 °C.
Heating mode:
10.0 or 16.0-30.0 °C
9. Press
.
The setting display will return to step 1.
10. Press
to complete the setting.
Be close to the indoor unit.
NOTE: [
] indicator on the indoor unit will not turn on even if the
setting is complete.
• If you want to return the previous step, press
• To check the schedule, use
timer settings in step 1.
To fi nish checking, press
• To deactivate the Weekly timer, press
shown on the remote controller display.
The indicator will disappear.
NOTES:
• The operation modes will be the same as the mode at the last time
operation was stopped, so Cooling → Heating → Cooling → Heating
type of operations cannot be set automatically.
• If you set the On timer and Off timer on the same time, the On timer
will work.
• If two On timers are set on the same time, the air conditioner will run
in the order of the program number.
• You cannot use the Weekly timer and the other timers
simultaneously.
If you use the On/Off timer, the Program timer, or the Sleep timer
while the Weekly timer is activated, the Weekly timer will be
deactivated.
In such a case, activate the Weekly timer after the other timer
fi nishes.
• If the wired remote controller (optional) is connected, this function is
restricted.
)
to select the program number and the
Program number
Day of the week
)
to choose the timer operation.
(On timer)
(Off timer)
)
to set on time or off time.
to set the temperature.
.
(
)
to browse the Weekly
.
while
is
En-6