AEG KDW 3 Istruzioni per l'utente - Pagina 35

Sfoglia online o scarica il pdf Istruzioni per l'utente per Lavastoviglie AEG KDW 3. AEG KDW 3 40. Electrolux user instructions dishwasher kdw 3

Leak Prevention System

For protection from damage due to water leaks, the dishwasher is

equipped with a leak prevention system, the AQUA CONTROL SYSTEM.

In the event of a fault, the safety valve immediately interrupts the sup-

ply of water to the appliance and the drain pump switches on. By this

means water can neither escape nor overflow. The remaining water in

the appliance is automatically pumped out.

The AQUA CONTROL SYSTEM also works when the appliance is switched

off – the appliance must however not be disconnected from the mains.

Any electrical work required to install this appliance should be car-

ried out by a qualified electrician or competent person.

WARNING - This appliance must be earthed.

The manufacturer declines any responsibility should these safety

measures not be observed.

Before switching on make sure the electricity supply voltage is the

same as that indicated on the appliance rating plate.

To isolate the dishwasher from the mains, remove the mains plug.

Important: The plug must still be accessible after the appliance has

been installed.

Changing a fuse

The appliance is supplied with a 13amp plug fitted. In the event of hav-

ing to change the fuse in the plug supplied, a 13amp ASTA approved

(BS 1363A) fuse must be used.

Should the plug need to be

replaced for any reason, proceed as

described below.

The wires on the mains lead are

coloured in accordance with the

following code.

Green and Yellow : Earth

Blue

Brown

Installation and Connection Instructions

: Neutral

: Live

Green

& Yellow

Blue

Cord Clamp

Brown