AEG 20604 G Manuale operativo e di installazione - Pagina 20

Sfoglia online o scarica il pdf Manuale operativo e di installazione per Piano cottura AEG 20604 G. AEG 20604 G 26. Gas hob
Anche per AEG 20604 G: Istruzioni per l'uso e l'installazione (27 pagine)

Stampa la pagina

Electrical connections

Any electrical work required to install this hob should be carried out

by a qualified electrician or competent person, in accordance with

the current regulations.

THIS HOB MUST BE EARTHED.

The manufacturer declines any liability should these safety measures not be

observed.

This hob is designed to be connected to a 230-240V 50Hz AC electrical

supply.

Before switching on, make sure the electricity supply voltage is the same as

that indicated on the hob rating plate. The rating plate is located on the

bottom of the hob. A copy is attached on the back cover of this book.

The hob is supplied with a 3 core flexible supply cord incorporating a 3amp

plug fitted. In the event of having to change the fuse, a 3amp ASTA

approved (BS 1362) fuse must be used.

Should the plug need to be replaced for any reason, the wires in the mains

lead are coloured in accordance with the following code:

Green and Yellow - Earth

Blue

Brown

1) Connect the green and yellow

(earth) wire to the terminal in

the plug which is marked with

the letter 'E' or the earth

symbol

and yellow.

2) Connect the blue (neutral) wire

to the terminal in the plug which is marked with the letter 'N' or

coloured black.

3) Connect the brown (live) wire to the terminal in the plug which is

marked with the letter 'L' or coloured red.

Upon completion there must be no cut, or stray strands of wire present and

the cord clamp must be secure over the outer sheath.

A cut off plug inserted into a 13 amp socket is a serious safety

(shock) hazard. Ensure that the cut off plug is disposed of safely.

- Neutral

- Live

or coloured green

FO 0390