Brother MFC-J680DW Manuale di configurazione rapida
Sfoglia online o scarica il pdf Manuale di configurazione rapida per Stampante All in One Brother MFC-J680DW. Brother MFC-J680DW 2.
Anche per Brother MFC-J680DW: Manuale di sicurezza del prodotto (25 pagine), Manuale d'uso (22 pagine), Manuale di sicurezza del prodotto (21 pagine)
Stampa la pagina
MFC-J680DW / MFC-J880DW
Quick Setup Guide
Read the Product Safety Guide first, then read this Quick Setup Guide for the
correct installation procedure.
Unpack the machine and check the components
1.
2.
Watch our FAQ Videos for help
with setting up your Brother
machine.
solutions.brother.com/videos
Introductory Ink Cartridges [x4]
• Black
• Yellow
• Cyan
• Magenta
Visit the Brother support website
http://support.brother.com
1
Load plain A4 paper
Pull the paper tray completely
out of the machine.
2
Connect the power cord
(Example for Australia)
Connect the power cord. The machine
will power on automatically.
Set your country (Available only for some
4
countries)
1.
Press your country.
Press [OK].
2.
Press [Yes] or [No].
3.
After the LCD shows [Accepted] for a few seconds, the machine will restart automatically.
6
Install introductory ink cartridges
Open the ink cartridge cover, and
then remove the orange protective
part from the machine.
8
Choose your language (Available only for some countries)
1.
Press
[Settings] > [All Settings] > [Initial Setup] > [Local Language].
2.
Press your language.
3.
Press
.
Remove the protective tape and film covering the machine.
Make sure you have all components.
• The components included in the box may differ depending on your country.
Quick Setup Guide
Basic User's Guide
Product Safety Guide
CD-ROM
1
Open the output paper tray
Fan the paper well and load it in the tray,
cover a.
and then adjust the paper guides.
NOTE
You can adjust the control panel angle
to read the Touchscreen more easily.
Follow the Touchscreen instructions
to install the ink cartridges.
The machine will prepare the ink
tube system for printing.
WARNING
WARNING indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injuries.
NOTE
NOTE specifies the operating environment, conditions for installation,
or special conditions of use.
(Australia
(Hong Kong
only)
only)
Power Cord
Telephone Line Cord
Adapter
Telephone Line Cord
USB Interface Cable
Close the output paper tray cover, and
then slowly push the tray completely
into the machine.
3
Connect the telephone line cord
If you are not using your machine as a fax, go to
(Example for Australia)
Connect the telephone line cord.
Use the socket marked LINE.
Choose your language (Available only for
5
some countries)
1.
Press your language.
Press [OK].
2.
Press [Yes] or [No].
7
Machine settings
When the machine has finished the initial cleaning process, follow the
Touchscreen instructions to configure the machine settings.
• Check print quality
• Set date and time
• View operation tips
• Set New Function Notice
• Print the installation sheet
LEW869040-00
OCE/ASA/GLF
Version 0
WARNING
Plastic bags are used in the packing of your machine. To
avoid the danger of suffocation, keep these plastic bags
away from babies and children. Plastic bags are not toys.
NOTE
• Most of the illustrations in this Quick Setup Guide show
the MFC-J880DW.
• Save all packing materials and the box in case for any
reason you must ship your machine.
• For a network connection you must purchase a
network interface cable. Please use the supplied
USB cable for a USB connection.
USB cable
We recommend using a USB 2.0 cable (Type A/B) that
is no more than 2 metres long.
Ethernet (Network) cable
Use a straight-through Category5 (or greater) twisted-
pair cable for 10BASE-T or 100BASE-TX Fast Ethernet
Network.
NOTE
Pull out the paper support a, and unfold
the paper support flap b so that the
printed pages do not fall.
4
.
NOTE
If your machine is sharing one telephone line with an
external telephone, connect it as shown below.
1
2
(Example for
Australia)
a. Extension telephone
b. External telephone
2
1