Brother MFC-J6940DW Manuale di sicurezza del prodotto - Pagina 17

Sfoglia online o scarica il pdf Manuale di sicurezza del prodotto per Stampante All in One Brother MFC-J6940DW. Brother MFC-J6940DW 23.
Anche per Brother MFC-J6940DW: Manuale di sicurezza del prodotto (23 pagine), Manuale di configurazione rapida (2 pagine), Manuale di configurazione rapida (2 pagine)

9. In the event of any problem with this device, it is to be disconnected, and a CPE item

connected to one of its terminal ports may be connected directly in its place. The user should

then arrange for the product to be repaired. Should the matter be reported to Telecom as a

wiring fault, and the fault is proven to be due to this product, a call-out charge will be

incurred by the customer.

10. If a charge for local calls is unacceptable, the "Dial" button should NOT be used for local

calls. Only the 7-digits of the local number should be dialled from your telephone. DO NOT

dial the area code digit or the "0" prefix.

11. This equipment may not provide for the effective hand-over of a call to another device

connected to the same line.

12. This unit will only work in conjunction with a tone signalling (DTMF) telephone, but some

telephones may not be compatible. Since noise or speech from the telephone can upset

dialling from this unit, errors may result if the devices are used together in other than quiet

conditions.

13. Where it is necessary to dial prefix digits, such as a Caller Display override code ("0196" or

"0197"), this unit will have to be used in conjunction with an associated tone signalling

(DTMF) telephone.

14. Note that some telephones are NOT compatible with this unit and dialling errors may result if

the two devices are used together in other than quiet conditions. The Telecom Faults Service

is NOT to be called should such problems arise. In such cases, it is recommended that the

prefix and wanted number are dialled manually.

15. The answer delay setting of this equipment shall not be set to less than the default setting as

this will destroy Caller ID information.

16. The caller ID telephone numbers which are displayed and stored in this equipment include

the caller's area code or cellular code but do not include the toll access "0" prefix. When

calling back it is necessary to add a "0" to the telephone number, or if the telephone number

is a local number, omit the area code digit. If the toll services of a service provider other than

Telecom are being used then a toll charge may be incurred if the "0" prefix toll access code

and area code are used.

17. When using the Caller Line Identification incorporated in this device, verify the integrity of the

recorded digits prior to dialling.

Important Information for Some Countries

Important Safety Instructions

1. Read all of these instructions.

2. Save them for later reference.

3. Follow all warnings and instructions marked on the product.

4. Unplug this product from the wall outlet before cleaning the outside of the product and the

scanner glass (for the products with scanning functionality). Do not use liquid or aerosol

cleaners. Use a damp cloth for cleaning.

5. Do not place this product near water.

6. Do not place this product on an unstable cart, stand, or table. The product may drop,

causing serious damage to the product.