Brother MFC-J835DW Manuale di sicurezza del prodotto - Pagina 5

Sfoglia online o scarica il pdf Manuale di sicurezza del prodotto per Stampante All in One Brother MFC-J835DW. Brother MFC-J835DW 17. Quick setup guide - spanish
Anche per Brother MFC-J835DW: Manuale (12 pagine), Manuale (21 pagine), Manuale Web Connect (22 pagine), Manuale di configurazione rapida (45 pagine), Manuale di sicurezza (17 pagine), Manuale di risoluzione dei problemi (6 pagine), (Spagnolo) Manuale (21 pagine), (Spagnolo) Manuale (16 pagine), (Inglese) Guida alla configurazione rapida (44 pagine)

If water, other liquids, or metal objects get inside the machine, immediately unplug the machine

from the AC power outlet and contact Brother Authorized Service Personnel.

DO NOT connect it to a DC power source or inverter. If you are not sure what kind of power

source you have, contact a qualified electrician.

Power Cord Safety:

• DO NOT pull on the middle of the AC power cord; pulling on the middle may cause the cord

to separate from the plug. Doing this might cause an electrical shock.

• DO NOT allow anything to rest on the power cord.

• DO NOT place this machine where people can walk on the cord.

• DO NOT place this machine in a position where the cord is stretched or strain is otherwise

put on the cord, as it may become worn or fray.

• If an extension cord is used with this machine, make sure that the total ampere ratings on

the machines plugged into the extension cord DO NOT exceed the extension cord ampere

rating. Also, make sure that the total of all machines plugged into the AC power outlet does

not exceed 15 amperes (USA only).

(MFC models only)

Never touch telephone wires or terminals that are not insulated unless the telephone line has

been unplugged at the wall jack. Never install telephone wiring during a lightning storm. Never

install a telephone wall jack in a wet location.

FIRE HAZARDS

Failure to follow the warnings in this section may create the risk of a fire.

DO NOT use flammable substances, any type of spray or an organic solvent/liquid that contains

alcohol or ammonia to clean the inside or outside of the machine. Doing this may cause a risk

of fire or electrical shock.

DO NOT use this machine in the vicinity of combustible dust.