Brother MFC-J995DW Manuale di riferimento - Pagina 22
Sfoglia online o scarica il pdf Manuale di riferimento per Stampante All in One Brother MFC-J995DW. Brother MFC-J995DW 29.
Anche per Brother MFC-J995DW: Manuale di configurazione rapida (2 pagine), Manuale di riferimento (31 pagine)
Error Message
Disconnected
Document Jam/too
Long
DR Mode in Use
High Temperature
Hub is Unusable.
Ink Absorber
NearFull
Ink Absorber Pad
Full
Ink Low
Jam A Inside/
Front
Repeat Jam A
Inside/Front
Action
Try to send or receive again.
If calls are stopped repeatedly and you are using a VoIP (Voice over
IP) system, try changing the Compatibility to Basic (for VoIP).
See Related Information: Telephone Line Interference/VoIP at the end
of this section.
The document was not inserted or fed correctly, or the document
scanned from the ADF was too long.
For more detailed information, see the Online User's Guide: Document
Jams.
The machine is in Distinctive Ring mode. You cannot change the
Receive Mode from Manual to another mode.
Set Distinctive Ring to Off.
For more detailed information, see the Online User's Guide: Turn off
Distinctive Ring.
After cooling the room, allow the machine to cool down to room
temperature. Try again when the machine has cooled down.
Hubs, including a USB flash drive with a built-in hub, are not
supported. Unplug the device from the USB direct interface.
The ink absorber box must be replaced soon. Call Brother Customer
Service or a Brother Authorized Service Center to have your machine
serviced.
• The ink absorber box absorbs the small amount of ink emitted
during print head cleaning.
The ink absorber box must be replaced. Call Brother Customer Service
or a Brother Authorized Service Center to have your machine serviced.
One or more of the ink cartridges are near the end of their lives.
Order a new ink cartridge. You can continue printing until the
touchscreen displays Replace Ink.
For more detailed information, see the Online User's Guide: Replace
the Ink Cartridges.
• You can still scan even if the ink is low or needs to be replaced.
Remove the jammed paper.
For more detailed information, see the Online User's Guide: Printer
Jam or Paper Jam.
Make sure the paper guides are set to the correct paper size.
DO NOT extend the paper tray when you load A5 or smaller size
paper.
Do not put more than one sheet of paper in the manual feed slot at any
one time. Wait until the touchscreen prompts you to load another sheet
of paper before you feed the next sheet of paper in the manual feed
slot.
21