Brother MFC-L2710DN Manuale di avvio rapido

Sfoglia online o scarica il pdf Manuale di avvio rapido per Stampante All in One Brother MFC-L2710DN. Brother MFC-L2710DN 4. Brief explanations for routine operations
Anche per Brother MFC-L2710DN: Manuale di configurazione rapida (2 pagine), Manuale di riferimento (23 pagine), Manuale di configurazione rapida (2 pagine), Manuale di configurazione rapida (2 pagine)

Reset procedure for Brother MFC-L2710DN/MFC-L2710DW

1) Open the printer Front-cover;

2) Press Clear and Stop/Exit button at the same time and then press Clear one more time. This step

must be done very quickly;

3) Press the down-arrow button and select K.TNR-HC;

4) Press OK to confirm the reset process and Accepted will appear on the printer's display.

Picture below is showing the buttons mentioned on the Step 3 and 4:

5) Close the printer Front-cover;

6) Printer is now ready for printing.

Reset procedure for Brother HL-L2310D

1. Open the front cover and leave it open while completing the following steps:

2. Turn the printer off.

3. Hold the 'go' button (or 'start' button) while turning the printer on. All panel lights should be on.

4. Release the 'go' button (or 'start' button).

5. Press the 'go' button (or 'start' button) 2 times.

6. Pause. All panel lights should be on.

7. Press the 'go' button (or 'start' button) 5 times. The toner light should be off (the error may be

flashing). The paper light should be on or flashing.

8. Close cover. The ready light should be the only light on.