2N Lift1 Compact Manuale breve - Pagina 10

Sfoglia online o scarica il pdf Manuale breve per Sistema interfonico 2N Lift1 Compact. 2N Lift1 Compact 12. For lifts
Anche per 2N Lift1 Compact: Manuale breve (12 pagine)

Stampa la pagina

876 – End-of call

message language

selection

877 – Outgoing call

message language

selection

912 – Maximum call

time

913 – Login time limit

(for automatic dialing)

914 – Delayed call

916 – Cancel input

inversion

920 – Alarm button

mode

962 – Minimum

button pressing time

965 – Private mode

0–9

0–99

15–990 s

120 s

10–990 s

60 s

0–1000 s

0 s

0-1

0-2

100–9999

100 ms

0–25

connection confirmation and call end

The meanings of the digits are as

follows:

1 = play user message recorded via

parameter 972

2 = read identification – parameter 974

3 = combine options 1 + 2

4 = send identification by DTMF

5 = message as specified in parameter

977 (after confirmation according to

parameter 976)

6 = combine options 5 + 2

7 = confirmation tone (after confirmation

only)

0,3,5,7 =

1 = English (or other main language

depending on Lift1 version)

2 = English (or tones for English

version)

4 = German

6 = Polish

8 = Portugese

9 = Dutch

10 to 99 = silence

Use the call-extending command to

extend the call (DTMF 4 or *).

Set the maximum period of time for the

control centre staff to answer the call

and send confirmation, otherwise Lift1

hangs up and dials the next number.

Counted from the end of dialing.

Applied only if the CANCEL input is

connected.

0 = contact closed or voltage present at

opened door

1 = contact opened or voltage not

present at opened door

0 = normally open contact or voltage

present to activate

1 = normally closed contact or voltage

not present to activate

2 = autodetection, during the next boot

of the device the state of the input

will be set as not active state.

Applies to the ALARM button.

Incoming call permitted always during

rescue process. Parameter specifies

functionality when the rescue process

is not active:

0 – incoming call permited during

rescue process only.

1 – 24 – time after alarm, when

incoming call is permitted (hours)