Brother DCP-375CW Manuale di configurazione rapida - Pagina 19

Sfoglia online o scarica il pdf Manuale di configurazione rapida per Stampante Brother DCP-375CW. Brother DCP-375CW 39. Inkjet dcp/mfc
Anche per Brother DCP-375CW: Manuale di configurazione rapida (43 pagine), Elenco di riferimento delle parti (32 pagine), Manuale di configurazione rapida (29 pagine)

Wired Network

For wired network interface users (Mac OS X 10.3.9 - 10.4.x - 10.5.x)

Before you install

Make sure your machine is connected to the

power and your Macintosh is ON. You must be

logged on with Administrator rights.

IMPORTANT

• For the latest drivers and information on the

Mac OS X you are using, visit

http://solutions.brother.com/.

• For Mac OS X 10.3.0 to 10.3.8 users, upgrade

to Mac OS X 10.3.9 - 10.5.x.

• Make sure there are no memory cards or a

USB Flash memory drive inserted into the

machine.

• If you have previously set up your machine

for a wireless network and then want to set

it up on a wired network, you should check

that the machine's Network I/F is set to

Wired LAN. The wireless network interface

will become inactive with this setting.

On your machine, press Menu.

Press a or b to choose 3.Network and press

OK.

Press a or b to choose 3.Network I/F and

press OK.

Press a or b to choose Wired LAN and press

OK.

Press Stop/Exit.

(DCP-373CW/375CW/377CW only)

Connect the network

cable

Using both hands, use the plastic tabs on both

sides of the machine to lift the scanner cover

until it locks securely into the open position.

Connect the network cable to the LAN socket

marked with a

LAN socket inside the machine on the left as

shown below.

LAN

USB

Macintosh

symbol. You will find the