CAUTION
DO NOT place any objects around the product. Such objects block the access to the power
outlet in case of emergency. It is important that the product can be unplugged whenever
needed.
The product may generate odorous gas such as ozone if used for a large volume of printing or
used in a poorly ventilated room for long hours. In addition, the product emits some chemical
substances during the printing. Ensure adequate ventilation for the product to avoid discomfort
or injury.
Avoid placing your product in a busy area. If you must place it in a busy area, ensure that the
product is in a safe location where it cannot be accidentally knocked over, which could cause
injury to you or others and serious damage to the product. Also ensure that cords are secured
so as not to pose a tripping hazard.
DO NOT place heavy objects on the product.
DO NOT place this product on an unstable cart, stand, or table, particularly if children are
expected to be near the product. The product is heavy and may fall, causing injury to you or
others and serious damage to the product. For the products with scanning function, there is an
added risk of injury if the scanner glass should break.
Put your product on a flat, level, stable surface (such as a desk), that is free from vibration and
shocks. Put the product near a telephone wall jack (MFC only) and a standard grounded AC
power outlet.
When multiple devices, including this product, are connected to a computer using USB cables,
you may feel an electric charge when you touch metal parts of the product. Avoid touching them.
IMPORTANT
• DO NOT place your product next to devices that contain magnets or generate magnetic fields.
Doing so may interfere with the operation of the product, causing print quality problems.
• DO NOT place your product next to sources of interference, such as speakers or the base units
of non-Brother cordless telephones. Doing so may interfere with the operation of the product's
electronic components.
• DO NOT connect your product to an AC power outlet controlled by wall switches or automatic
timers. DO NOT connect your product to the same circuit as a large appliance or other
equipment that requires a significant amount of electricity to operate (such as an air
conditioner, copier, or shredder). Operating this product in conjunction with other products that
require a significant amount of electricity to operate could disrupt the power supply or create
an overvoltage, tripping your circuit breaker or blowing your fuse. Disruption of the power
supply also may delete information from the product's memory, and repeated cycling of the
power supply can damage the product.
4
Stampa la pagina