AC Penguin Prestige BGEU1 Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per Telecomando AC Penguin Prestige BGEU1. AC Penguin Prestige BGEU1 8. Air conditioner remote controller

Stampa la pagina
Operation of buttons
6
1
7
ON/ OFF
SILENCE
8
2
TIMER
MODE
ON
TEMP
3
9
TIMER
FAN
OFF
10
4
SWING DIRECT
ECO
11
12
LED
TURBO
5
1
ON/OFF Button
This button turns the air conditioner ON
and OFF.
MODE Button
2
Press this button to modify the air conditioner
mode in a sequence of following:
AUTO
COOL
DRY
HEAT
FAN
NOTE：Please do not select HEAT mode if the
machine you purchased is cooling only type.
Heat mode is not supported by the cooling onl y
appliance.
3
FAN Button
Used to select the fan speed in four steps:
AUTO
LOW
MED
HIGH
NOTE: You can not switch the fan speed in
AUTO or DRY mode.
4
ECO Button
Used to enter the energy efficient mode.
Under cooling mode, press this button, the
remote controller will adjust the temperature
O
automatically to 75 F, fan speed of Auto to
save energy(but only if the set temperature
O
is less than 75 F). If the set temperature is
O
O
between 75 F and 86 F, press the ECO
button, the fan speed will change to Auto,
the set temperature will remain unchanged.
NOTE:
Pressing the TURBO and MODE button,
modifying the mode or adjusting the set
O
temperature to less than 75 F will stop
ECO operation.
Under ECO operation, the set temperature
O
should be 75 F or more. it may result in
insufficient cooling. If you feel uncomfortable,
just press the ECO button again to stop it.
Operation of buttons
6
1
7
ON/OFF
SILENCE
8
2
TIMER
MODE
ON
TEMP
9
3
TIMER
FAN
OFF
10
4
ECO
SWING DIRECT
11
12
LED
TURBO
5
5
TURBO Button
Active/Disable Turbo function. Turbo function
enables the unit to reach the preset temper-
ature at cooling or heating operation in the
shortest time(if the indoor unit does not
support this function, there is no
corresponding operation happened when
pressing this button.)
6
UP Button(
)
Push this button to increase the indoor
o
temperature setting in 1 F increments to 86 F.
DOWN Button(
)
Push this button to decrease the indoor
o
temperature setting in 1 F increments to 62 F.
NOTE：Temperature contol is not available
in Fan mode.
UP
DOWN
NOTE: Press and hold
and
buttons
together for 3 seconds will alternate the temper-
O
O
ature display between the C & F scale.
7
SILENCE Button
Active/Disable Silence function.
When the Silence function is activated, the
compressor will operate at low frequency
and the indoor unit will bring faint breeze,
which will reduce the noise to the lowest
level and create a quiet and comfortable
room for you. Due to low frequency operation
of compressor, it may result in insufficient
cooling and heating capacity.
8
TIMER ON Button
Press this button to initiate the auto-on
time sequence. Each press will increase
the auto-timed setting in 30 minutes
increments. When the setting time displays
10.0, each press will increase the auto-
timed setting 60 minutes increments.
To cancel the auto-timed program, simply
adjust the auto-on time to 0.0.
o
o