LG VX7000DP Manuale - Pagina 4
Sfoglia online o scarica il pdf Manuale per Telefono cellulare LG VX7000DP. LG VX7000DP 5.
Stampa la pagina
Manually Programming the VX7000
1.
Press "menu" + 0 and press "000000"
2.
Press "1" key for Service Programming
3.
Press "ok" (Read only)
4.
Input the "Phone number (MDN)" and press "ok"
5.
Input the "Phone number (MIN)" and press "ok"
6.
Input the "NAM1 Home SID" and press "ok"
7.
Input the "NAM1 Name" and press "ok"
8.
Confirmation "Basic NAM1 is completed" when programmed
successfully
9.
Press Left Soft Key for "Exit". Powering Down will proceed
OTA Instructions
1.
Perform the usual billing system activation procedure
2.
Power up the phone and enter the Star Code, *228 + [send], on
the handset
3.
The following audio message will be heard:
"Welcome to Verizon Wireless' Over the Air programming. This
call is airtime free. Press '1' to program your phone. Press '2' to
update your roaming capabilities."
Note: Programming will take up to 2 minutes. Should the
programming exceed 45 seconds, the following audio message
will be repeated at 25-second internals:
Your phone is being programmed."
You will hear an audio message once the phone has been successfully
programmed
How to Access the Web
1.
Press up on the Navigation Key to access the web browser.
2.
Once the web browser is launched, you will see the Home Page.
3.
You can end a browser session by pressing END at any time.
Helpful Hints
Helpful Hints
"Please continue to hold.
IP Address Programming
1.
Press "menu" + 0 and enter service code "000000"
2.
Press 9 for "WAP Setting"
3.
6 Items will be displayed on the LCD screen
4.
Press 1 for "Proxy Address Setting"
5.
Press 2 for "Proxy Port Setting"
6.
Press 3 for "User Password"
7.
Press 4 for "Homepage"
8.
Press 5 for "Clear Perm Mem"
9.
Press 6 for "Reset Browser"
How to Send a Text Message
1.
Press Left Soft Key for Message and select New Txt Msg
(1)
2.
Press Left Soft Key for Add to enter a recipient from the
Contacts, Group or Recent Calls menu or use the Key Pad to
enter a new email address or phone number and press OK. Up
to ten recipients can be added.
3.
Scroll down and enter the message (up to 160 characters)
using the keypad and press OK for SEND
How to View the Software, PRL, ERI and Browser Version:
1.
From the SETTINGS & TOOLS menu, select System (4)
2.
Select Device Info (2)
3.
Select SW Version (2)
The below link includes technical information for the
data base management group
VX7000