LG 216SC Manuale d'uso - Pagina 13

Sfoglia online o scarica il pdf Manuale d'uso per Monitor LG 216SC. LG 216SC 33. Color monitor

Connecting to any IBM VGA PC Compatible System

Figure 3 shows the signal cable connections from the monitor to the

Video Graphics Array (VGA) port typical in an IBM PC or PC

compatible. This also applies to any graphics video card for PC-CAD

or workstation that has a 15 pin high density (3 row) D-Sub connector.

Power off both the monitor and PC.

Connect the 15 pin VGA connector of the supplied signal cable to

the output VGA video connector on the PC and the matching input

connector on the rear of the monitor. The connectors will mate

only one way. If you cannot attach the cable easily, turn the

connector upside down and try again. When mated, tighten the

thumbscrews to secure the connection.

Power ON the PC, then the monitor.

If you see the NO SIGNAL DETECTED message, check the

signal cable and connectors.

After using the system, power OFF the monitor, then the PC.

Power Cord

D-15P

Signal Cable

Figure 3