AEG 7000 Series Manuale d'uso - Pagina 20
Sfoglia online o scarica il pdf Manuale d'uso per Lavatrice AEG 7000 Series. AEG 7000 Series 49.
Anche per AEG 7000 Series: Manuale d'uso (32 pagine), Manuale d'uso (44 pagine), Manuale d'uso (32 pagine), Manuale d'uso (28 pagine), Manuale d'uso (36 pagine)
Stampa la pagina
20
www.aeg.com
7. DIAL AND BUTTONS
7.1 Introduction
The options/functions are
not available with all
washing programmes. Check
the compatibility between
options/functions and
washing programmes in the
"Programme Chart". An
option/function can exclude
another one, in this case the
appliance doesn't allow you
to set incompatible options/
functions.
7.2 On/Off
Press this button for a few seconds to
activate or deactivate the appliance. Two
different tunes sound while switching the
appliance on or off.
As the Stand-by function automatically
deactivates the appliance after several
minutes to reduce the energy
consumption, you may need to activate
the appliance again.
For more details, refer to Stand-by
paragraph in Daily Use chapter.
The spin area:
Spin speed indicator
No Spin indicator. Spin phase is off.
Silent indicator.
Rinse Hold indicator.
Add garments indicator. it lights at the beginning of the washing
phase, when it is still possible to pause the appliance and add
more laundry.
Maximum load indicator (refer to "The ProSense System load de-
tection " paragraph).
It flashes when the laundry load exceeds the maximum de-
clared load of the selected programme.
7.3 Programme dial
For selecting the desired washing
programme. Refer to 'Programmes'
chapter for more details.
The position
is a "Reset" function,
which stops and resets the running
programme. The display shows empty
dashes to indicate that no programme
was selected.
7.4 Temp.
When you select a washing programme,
the appliance automatically proposes a
default temperature.
Touch this button repeatedly until the
desired temperature value appears on
the display.
When the display shows the indicators
, the appliance does not heat the
water.
7.5 Spin
When you set a programme, the
appliance automatically sets the
maximum spin speed allowed, except for
programme Denim. With this option you
can decrease the default spin speed.
Touch repeatedly this button to: