AEG 7000 Series Manuale d'uso - Pagina 43

Sfoglia online o scarica il pdf Manuale d'uso per Lavatrice AEG 7000 Series. AEG 7000 Series 49.
Anche per AEG 7000 Series: Manuale d'uso (32 pagine), Manuale d'uso (44 pagine), Manuale d'uso (32 pagine), Manuale d'uso (28 pagine), Manuale d'uso (36 pagine)

Stampa la pagina

Problem

The programme does

not start.

The appliance fills with

water and drains im-

mediately.

The spin phase does

not operate or the

washing cycle lasts

longer than usual.

There is water on the

floor.

You cannot open the

appliance door.

The appliance makes

an unusual noise and

vibrates.

The programme dura-

tion increases or de-

creases during pro-

gramme execution.

Possible solution

• Make sure that the mains plug is connected to the mains sock-

et.

• Make sure that the appliance door is closed.

• Make sure that there is no damaged fuse in the fuse box.

• Make sure that the Start/Pause has been touched.

• If the delay start is set, cancel the setting or wait for the end of

countdown.

• Deactivate the Child Lock function if it is on.

• Check the position of the knob on the selected programme.

• Make sure that the drain hose is in the correct position. The

hose may be positioned too low. Refer to "Installation instruc-

tion".

• Set the spin programme.

• Make sure that the drain filter is not clogged. Clean the filter,

if necessary. Refer to "Care and cleaning".

• Adjust manually the items in the tub and start the spin phase

again. This problem may be caused by balance problems.

• Make sure that the couplings of the water hoses are tight and

there is not water leakages.

• Make sure that the water inlet hose and the drain hose have

no damages.

• Make sure you use the correct detergent and the correct

quantity of it.

• Make sure that a washing programme that ends with water in

tub, has not been selected.

• Make sure that the washing programme is finished.

• Set the drain or the spin programme if there is water in the

drum.

• Make sure that the appliance receives electrical power.

• This problem may be caused by a failure of the appliance.

Contact the Authorised Service Centre.

If you need to open the door, please read carefully "Emergen-

cy door opening".

• Make sure the levelling of the appliance is correct. Refer to

"Installation instruction".

• Make sure that the packaging and/or the transit bolts are re-

moved. Refer to "Installation instruction".

• Add more laundry in the drum. The load may be too small.

• The ProSense System is able to adjust the programme dura-

tion according to the type and the laundry load size. Refer to

"The ProSense System load detection" in "Daily Use" chapter.

ENGLISH