Brother P-Touch PT-E550WNIVP Manuale di configurazione rapida - Pagina 10

Sfoglia online o scarica il pdf Manuale di configurazione rapida per Etichettatrice Brother P-Touch PT-E550WNIVP. Brother P-Touch PT-E550WNIVP 49.

Stampa la pagina

INTRODUCTION

Rechargeable Li-ion Battery

Carefully observe the following precautions for the rechargeable Li-ion battery (hereafter

referred to as "rechargeable battery"). If these precautions are not followed, overheating,

leaking, or cracks in the battery may result in an electrical short, explosion, smoke, fire,

electric shock, injury to yourself or others, or damage to the product or other property.

Use the rechargeable battery only for its

intended purpose. The P-touch labeling

system and rechargeable battery are

designed to function exclusively with

each other. DO NOT insert the

rechargeable battery into a different P-

touch labeling system, or a different

rechargeable battery into your P-touch

labeling system, otherwise fire or

damage may result.

To charge the rechargeable battery,

insert it into the P-touch labeling

system, and then use the AC adapter

designed specifically for this P-touch

labeling system.

DO NOT charge the rechargeable

battery near a fire or in direct sunlight.

This could activate the protection

circuitry, which is designed to prevent

danger from high heat. Activation of the

protection circuitry could cause

charging to stop, charging to occur with

excessive current/voltage if the

protection circuitry fails, or an abnormal

chemical reaction within the battery.

When charging the rechargeable

battery, use only a battery charger

designed specifically for the

rechargeable battery.

DO NOT allow wires or other metal

objects to come into contact with the

terminals of the rechargeable battery.

DO NOT carry or store the rechargeable

battery with metal objects such as

necklaces or hairpins. This could cause

an electrical short, and lead metal

objects such as wires, necklaces, or

hairpins to overheat.

DANGER

DO NOT use or leave the rechargeable

battery near fire, heaters, or other high

temperature (above 176

locations.

DO NOT allow the rechargeable battery

to come into contact with or to be

immersed in water.

DO NOT use the rechargeable battery

in corrosive environments, such as

areas where salty air, salt water, acids,

alkalis, corrosive gases, chemicals, or

any corrosive liquid are present.

DO NOT use the rechargeable battery if

it is damaged or leaking.

DO NOT directly solder any connections

to the rechargeable battery. This could

cause internal insulation to melt, gas to

be emitted, or safety mechanisms to fail.

DO NOT use the rechargeable battery

with the polarity (+) (-) reversed. Check

the orientation of the rechargeable

battery before inserting it, and do not try

to force the rechargeable battery into

the P-touch labeling system. Charging

the rechargeable battery with the

polarity reversed could cause an

abnormal chemical reaction within the

rechargeable battery or abnormal

current flow during discharge.

DO NOT directly connect the

rechargeable battery to a household

electrical supply.

F/80