AEG L 98685 FL Manuale d'uso - Pagina 21
Sfoglia online o scarica il pdf Manuale d'uso per Lavatrice AEG L 98685 FL. AEG L 98685 FL 40. Front-loading washing machine
Anche per AEG L 98685 FL: Manuale d'uso (40 pagine), Manuale d'uso (44 pagine)
Stampa la pagina
Before you touch button
start the appliance, you can can-
cel or change the set of the de-
lay start.
STARTING A PROGRAMME
1. Touch button
gramme. The indicator of button
stops to flash and is on with red col-
our.
If a delayed start is set, the appliance
starts the countdown.
The appliance adjust automat-
ically the cycle time to the
laundry you have put in the
drum to have perfect washing
results in the minimum neces-
sary time. After approximately
15 minutes from the start of
the programme, the display
shows the new time value.
INTERRUPT A PROGRAMME
1. Touch button
flashes.
2. Touch button
ing programme continues.
CANCEL A PROGRAMME
1. Press button
gramme and to deactivate the ap-
pliance.
2. Press button
the appliance. Now, you can set a
new washing programme.
The appliance does not drain
the water.
CHANGE A FUNCTION
You can change only some functions
before they operate.
AT THE END OF PROGRAMME
1. The appliance stops automatically.
2. The acoustic signals operate, if it is
active.
6
to
to start the pro-
6
. The indicator
6
again. The wash-
6
1
to cancel the pro-
again to activate
1
You cannot set the delay start
with the Steam programme.
1. Touch button
flashes.
6
2. Change the function set.
3. Touch button
ing programme continues.
OPEN THE DOOR
While a programme or the delay start
operates, the appliance door is locked.
To open the appliance door:
1. Touch button
symbol in the display goes off and a
message tells you that the door is
unlocked.
2. Open the appliance door.
3. Close the appliance door and touch
button
6
or the delay start continues.
If the temperature and the level
of the water is too high, the
door lock symbol stays on. You
cannot open the door. If neces-
sary, do the following procedure
to open the door:
1. Deactivate the appliance.
2. Wait for some minutes.
3. Make sure that no water is in
the drum.
If you deactivate the appliance,
it is necessary to set the pro-
gramme again.
3. In the display
message tells you that the pro-
gramme is completed.
ENGLISH
. The indicator
6
again. The wash-
6
6
. The door lock
again. The programme
goes on and the
21