Brother QL 570 - P-Touch B/W Direct Thermal Printer Manuale di configurazione e funzionamento - Pagina 25

Sfoglia online o scarica il pdf Manuale di configurazione e funzionamento per Etichettatrice Brother QL 570 - P-Touch B/W Direct Thermal Printer. Brother QL 570 - P-Touch B/W Direct Thermal Printer 43. Professional label printer
Anche per Brother QL 570 - P-Touch B/W Direct Thermal Printer: Opuscolo (4 pagine), Manuale d'uso (36 pagine), Manuale d'uso (26 pagine), Manuale d'uso (40 pagine), Manuale di configurazione e funzionamento (45 pagine), Manuale d'uso (2 pagine), Manuale di installazione del software (15 pagine)

2. When using Mac OS

This section explains how to install P-touch Editor 5.0, Fonts, Auto Format Templates,

Clip Art, and the printer driver. After the driver is installed the driver configuration is

explained.

•

Until the installation of printer driver is completed, do not connect the machine to

your Macintosh

Network interface cable from your Macintosh

•

When installing the machine, log in as the administrator.

The following is the example for Mac OS

QL-XXX. Read "XXX" as your printer name. The printer names in the following screens

may differ from your purchased printer name.

Start the Macintosh

Double click the "QL_Series" (CD-ROM) icon.

Click the [Mac OS X] folder and double click the [P-touch Editor 5.0

Installer].

Follow the on-screen instructions.

After the installation is completed and

the screen shown right is displayed,

click [Done].

The installation of the P-touch Editor 5.0 is

completed.

Next, install the printer driver.

Open [Brother QL-XXX Driver] in [Mac OS X] folder. Double

click [Brother QL-XXX Driver.pkg] in your OS name folder.

The Driver Installer starts up. Follow the on-screen instructions.

When the installation is completed and

the message "Click Restart to finish

installing the software" is displayed,

click [Restart].

The Macintosh

The installation of the printer driver is completed.

. If it has been connected to it, pull out the USB interface cable/

, and insert the CD-ROM into the CD-ROM drive.

is restarted.

X 10.4.9. In the following steps, you will see

STEP